Interwrite
6
TM
Installation Overview
This section describes what you will be doing and the order in which you
will be doing it, to facilitate the setup of your Interwrite Panel and Interwrite
Pens and their preparation for use.
1. Unpack Your Interwrite Panel
The package includes the Interwrite Panel and an Accessory Box. The
Accessory Box contains:
VGA Cable
AC Adapter
Power Cable
USB Cable
Audio Cable
2 Interwrite Pens
2 AAA Batteries
Interwrite Learning
Interwrite
If any item is missing or damaged, please contact your dealer immediately. A
plastic covering is taped to the Interwrite Panel screen to protect it during
shipping. We recommend you leave the protective plastic in place until you
have completed your Interwrite Panel installation. It is easily removed by
pulling on the tape tabs.
2.
Assemble the Interwrite Pens
Each Interwrite Pen is powered by one AAA alkaline battery.
3.
Install the Interwrite Workspace Software
4.
Setup and Connect Your Interwrite Panel
The Interwrite Panel can be set up as a free-standing monitor on a desk or
table, or it can be installed in a podium. Your Interwrite Panel is connected
to your computer with both the VGA cable and the USB cable. It is con-
nected to a power source with the AC Adapter and Power cable.
5.
Calibrate the Interwrite Panel Screen
The Interwrite Pen works best when it is held at a 90° angle to
the Interwrite Panel screen.
Panel
CD
TM
Panel Getting Started Guide (this booklet)
TM
Getting Started