Troubleshooting - Kenwood KDC-BT365U Instruction Manual

DISPLAY SETTINGS
COLOR Select color for ALL ZONE, ZONE 1 and ZONE 2 separately.
1
SELECT*
1 Select a zone. ( 22)
2 Select a color for the selected zone.
VARIABLE SCAN/ CUSTOM R/G/B/ preset colors*
Default:
To make your own color, select [CUSTOM R/G/B]. The color you have
made will be stored in [CUSTOM R/G/B].
1 Press the volume knob to enter the detailed color adjustment.
2 Press S / T to select the color (R/ G/ B) to adjust.
3 Turn the volume knob to adjust the level (0 — 9), then press the
knob.
DIMMER Dim the display illumination (and button illumination*
ON: Dimmer is turned on. ; OFF: Cancels.
DIMMER TIME: Set the dimmer on and off time.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: 6:00 PM; [OFF]: 6:00 AM)
BRIGHTNESS
(For
1 Select a zone. ( 22)
2 0 — 31: Select your preferred brightness level for display
illumination and button illumination.
(For
0 — 31: Select your preferred brightness level for display illumination
and button illumination.
TEXT SCROLL AUTO/ ONCE: Select whether to scroll the display information
automatically, or scroll only once. ; OFF: Cancels.
* 1
For /
* 2
Preset colors: RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/ PURPLE4/
BLUE1/ BLUE2/ BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/ AQUA1/ AQUA2/
GREEN1/ GREEN2/ GREEN3/ YELLOWGREEN1/ YELLOWGREEN2/ YELLOW/
ORANGE1/ ORANGE2/ ORANGERED
Default: XX
2
/ /
: VARIABLE SCAN
: CUSTOM R/G/B (R = 9/ G = 9/ B = 9)
1
).
/ / )
/ )
/ .

TROUBLESHOOTING

Symptom
Sound cannot be heard.
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
/
"PROTECTING SEND SERVICE"
appears.
• Sound cannot be heard.
• The unit does not turn on.
• Information shown on the
display is incorrect.
The unit does not work at all.
(For
"SET ERROR" / "DEL ERROR"
• Radio reception is poor.
• Static noise while listening
to the radio.
Disc cannot be ejected.
Noise is generated.
Tracks do not play back as you
intended them to play.
"READING" keeps flashing.
Elapsed playing time is not
correct.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
Send the unit to the nearest service center.
Clean the connectors. ( 26)
Reset the unit. ( 3)
Setting/deleting the remote control ID is unsuccessful.
)
Turn the power off, then turn on the power and perform
the operation again. ( 5)
Connect the antenna firmly.
Press and hold M to forcibly eject the disc. Be careful not
to drop the disc when it is ejected. If this does not solve
the problem, reset the unit. ( 3)
Skip to another track or change the disc.
Playback order is determined when files are recorded.
Do not use too many hierarchical levels or folders.
This is caused by how the tracks are recorded.
23
ENGLISH