Tumble Seat Operation; Third Row Seat Operation - Datsun Go Quick Reference Manual

TUMBLE SEAT OPERATION [IF EQUIPPED]
Fig. 1
PULL
Seat Back
Seat Cushion
Fig. 2
Fig. 3
6 Quick Reference Guide
REAR TUMBLE SEAT USAGE
Re a r s e a t t u m b l e p o s i t i o n h e l p s t h e
passenger to enter the third row seat
A) To fold 2nd row seat [For Tumble
position]
Pull the Knobs to unlock seat back as
Ÿ
shown in (Fig: 1) & fold the seat back
as shown in (Fig: 2)
Pullout all the buckles [b1,b2,b3] and
Ÿ
center s e a t b e l t [ s ] fro m t h e g a p
between Seat cushion & seat back
( )and place it on the oor as in
(Fig: 2)
Lift the folded seat from rear side
Ÿ
(Fig: 2 ) to take the seat for tumble
position as shown in (Fig: 3)
B) To unfold 2nd row seat [For Seating
position]
Place the seat cushion on the oor as
Ÿ
shown in (Fig: 2)
Insert all the buckles [b1,b2,b3] and
Ÿ
center seat belt [s] from the gap
between Seat cushion & seat back
( ) as shown in (Fig: 2)
Lift the seat back and lock it to seating
Ÿ
position as in (Fig: 1)
Warning:
Do not drive / ride the vehicle with the
Ÿ
second row seat in back fold position
or tumble position (Fig: 2 & Fig: 3)
Be careful not to allow the second row
Ÿ
seat to pinch, hit any part of your body
or other people when operating the
second row seat. Make sure the sea
Caution Label information
THIRD ROW SEAT OPERATION [IF EQUIPPED]
Pull the lever towards the rear of the
vehicle to fold the seat back down.
To return the seat back to the seating
position, lift up the seat back and
push it to the upright position until it
is locked.
THIRD ROW SEAT BELT USAGE
Insert the tongue into the buckle
until you hear and feel the latch
engage.
A d j u s t t h e s e a t b e l t l e n g t h . To
shorten, hold the tongue and pull the
upper belt as illustrated. (1) To length,
hold the tongue and pull the under
belt as illustrated (2) .
Position the lap belt portion low and
sung on the hips as shown.
Quick Reference Guide 7