How To Use Mobile Docking Station - Datsun Go Quick Reference Manual

HOW TO USE MOBILE DOCKING STATION

Mobile docking station
1 Mobile Holder
2. Power ON/OFF Button
3. VOL (Volume) Control Knob
4. Microphone
5. AUX IN (auxiliary input) Jack
6. USB charging connector
MDS Features:
Handsfree Telephone (wired)
§
Music Player Connectivity
§
MDS Features:
Mobile Docking Station (MDS) system offers a
hands-free facility for your mobile phone to
enhance driving comfort:
§
Take 3.5mm (4 PIN) two terminal AUX-IN cable
(shown in picture).
§
Recommendation to use dealer option cable.
§
Connect one terminal of aux-cable to mobile
phone (Straight end).
§
Connect other terminal of aux-cable to MDS.
§
Place the mobile phone in mobile holder.
§
Dialing or Accept or Reject call in mobile phone.
Note: MDS will not support some mobile phones for hands-free telephone.
Music player connectivity
To enjoy, the personalized music play list, the MDS AUX IN audio input
jack accepts any standard analog audio input, such as from a portable
digital audio player, or mobile phone.
Take 3.5 mm (4PIN or 3PIN) two terminal AUX-IN cable.
§
Connect one terminal of aux-cable to mobile phone.
§
Connect other terminal of aux-cable to MDS.
§
Place the mobile phone in mobile holder.
§
8 Quick Reference Guide
1 2 3
4 5 6
USB Charging
§
Mobile Holder
§
Enjoy your personal music play
§
list, music application and FM
radio station in using mobile
phone.
Sound output from vehicle
§
Speakers and Volume control in
MDS.
How to use mobile phone charging
The MDS outlet connector can
only charge the mobile phone.
Connect a USB cable into the
§
connector.
The system starts charging the
§
U S B d e v i c e a u t o m a t i c a l l y
(Maximum output up to 1 A).
Note: When AUX & USB cable are connected together, noise may occur by
some mobile phone. In case, increase the mobile phone volume to max before
charging.
How to use mobile holder
To set a
mobile
phone,
place
the
mobile
phone
on the mobile holder and adjust
the mobile holder 1 depending
on size of mobile phone. Then
tighten the holder arms 2.
To release the mobile phone from
mobile holder, push the release
button 3.
Mobile holder
release button
Adjust
the
mobile
holder
angle
until
the
desired position is achieved.
The mobile holder can be set
sideways or long ways.
Caution - Maximum size & weight
of mobile phone that MDS support
Height Weight
Width Thickness
60mm 16mm 123mm 160g
Quick Reference Guide 9