USER MANUAL The manufacturer reserves the right to make changes to the miniPRO, release firmware updates, and update this manual at any time. Visit www.segway.com to download the latest user materials. You must install the Ninebot by Segway App to follow the New Rider Tutorial, watch the Safety Video, activate your miniPRO, and obtain the latest updates and safety instructions.
You must first download the Ninebot by Segway App on your mobile device. The App will lead you through the New Rider Tutorial. For your safety, the miniPRO will limit the max speed to 4.3 mph (7 km/h) until you 3 Diagram have completed the New Rider Tutorial.
Front Back When unpacking your miniPRO, please verify that the above items are included in the package. If you are missing any components, please contact your dealer/distributor or email technicalsupport@segway.com. After verifying that all components are present and in good condition, you can assemble your new WARNING miniPRO.
Riding Safety 9. Be alert! Scan both far ahead and in front of your miniPRO — your eyes are your best tool for safely avoiding obstacles and low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice).
Button Charge Port or when laid down (horizontal) for over 30 seconds. Enable Lock Mode via the App. The miniPRO will vibrate, flash its lights, and sound an alarm Headlight Lock if anyone moves it. The App will also alarm. The miniPRO will not balance in Lock Mode.
Power ON. Until activated, the miniPRO maintains a very low riding speed and steering sensitivity, and should not be ridden. Install the Ninebot by Segway App on your mobile device (with Bluetooth 4.0 or above), connect to the miniPRO with Bluetooth, and follow the App instructions to activate your miniPRO and follow the training procedures.
The App will lead you through the New Rider Tutorial. For your safety, the miniPRO will limit the max speed to 4.3 mph (7 km/h) until you complete the New Rider Tutorial. For the first 0.6 miles (1 km) after completing...
Warning You must read and understand the Warnings and Safe Riding instructions in this manual before attempting to ride the miniPRO. Avoid contacting obstacles When traversing small bumps or uneven terrain, maintain a Do not accelerate when the Do not ride through Do not ride on public roads, with the tire/wheel.
Do not ride on low traction Maintain contact with the For your safety, motor power is cut off when the miniPRO is lifted off the ground in Balance Mode. When the any kind. Always keep ground at all times. Do not surfaces (including, but not miniPRO is put back down it will begin balancing again.
Store your miniPRO in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to under-discharge will not be covered by the Limited Warranty.
Items N3M320 Parameters ® Ninebot by Segway™ is a trademark of Segway Inc.; iPhone and iOS, that of Apple Inc.; Android, that of Google Inc. Length × Width 10.3 × 24.5 in (262 × 546 mm) The respected owners reserve the rights of their trademarks referred to in this manual.
Certifications Contact Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with your miniPRO. Safety — Cells and battery pack have passed UN/DOT38.3 test and certification — 2014/35/EU: EN 60950-1:2006/A2:2013 Segway Inc. — 2006/42/EC: EN ISO 12100:2010; EN ISO 13849-1:2008/AC:2009; EN 62061:2005/AC:2010; EN 60204-1:2006/AC:2010 14 Technology Drive, Bedford, NH 03110 —...
Need help?
Do you have a question about the miniPRO and is the answer not in the manual?
Questions and answers