Kurzweil Andante CGP 220 User Manual page 8

Chapter 3
Overview
Navigation Buttons
Select ▲ and ▼ Buttons
Use these buttons to move through the list of available
parameters for the current mode. These buttons are used in
Function, Split, Layer, and Rhythm Modes only.
Prev- Button
Press this button to select the next lower Voice, Rhythm Pattern, user
song or parameter value. When using the metronome or playing a Rhythm pattern, use this button to
decrease the tempo. This button is also used to tune or transpose downward.
+Next Button
Press this button to select the next higher Voice, Rhythm Pattern, user song or parameter value. When
using the metronome or playing a Rhythm Pattern, use this button to increase the tempo. This button is
also used to tune or transpose upward.
Bank LEDs and Category Buttons
Bank LEDs
These three LEDs are indicators for the three category banks (two voice and one rhythm). Press the
Voice or Rhythm button to select a bank. A lit LED indicates the active bank.
Category Buttons
Press one of the category buttons to select a voice or rhythm pattern group; then use the Prev- or
+Next button to step through options in that group.
Favorites Buttons
Favorites 1 through 6
Select one of 6 previously stored favorite sounds by pressing the Favorites button assigned to it. Store
the current sound (with any active splits and layers) by pressing and holding the desired Favorites
button until the word Saved appears on the display.
page 8
Demo Button
Press the Demo button to begin playing the classical piano demonstration songs. Press Demo again to
leave Demo Mode.
Recording and Play/Stop Buttons
Record Button
Press this button to begin recording.
Play/Stop Button
Select this button to play or stop recording, user songs, Rhythm Patterns, and Demos.
Track 1 and Track 2 Buttons
Use these buttons to select the track to record.
Variation and Tempo Buttons
Variation Button
For most voices, pressing the Variation button will enable a pad layer, string layer, or effect.
Tempo Button
Use the Tempo button to access the tempo of the metronome and Rhythm
Patterns, then make changes with Prev- or +Next buttons.
Mode and Save Buttons
Save Button
Press the Save button to save a user song or to save split and layered voices. The display will prompt
you to choose a memory location.
Function Button
Press the Function button to enter Function Mode. Global functions
affecting the instrument overall may be adjusted in this mode.
Layer Button
Press the Layer button to enter Layer Mode and create 2 layered voices.
Split Button
Press the Split button to enter Split Mode and create split voices.
Chapter 3
Overview
page 9