Asus B150 PRO GAMING User Manual page 16

•
•
•
•
•
•
B150 PRO GAMING motherboard memory Qualified Vendors Lists (QVL)
DDR4 3000 MHz (O.C.) capability
Vendors Part No.
KINGSTON HX430C15PB2K4/16
KINGSTON HX430C15PB2K4/16
G.SKILL F4-3000C15Q-16GRR
TEAM TCD48G3000C16ABK
TEAM TCD44G3000C16ABK
PANRAM PUD43000C154G4NJW 4G
KINGSTON HX430C15PBK4/32
DDR4 2800 MHz (O.C.) capability
Vendors Part No.
CORSAIR CMK16GX4M4A2800C16 4G
G.SKILL HX428C14PB2K4/16
G.SKILL F4-2800C6Q-16GRK
PATRIOT PX416G280C6QK
GLOWAY PC4-22400
PANRAM PUD42800C164G4NJW
MUSHKIN 994207F
KINGSTON HX428C14PBK/32
1-8
You may install varying memory sizes in Channel A and Channel B. The system
maps the total size of the lower-sized channel for the dual-channel configuration. Any
excess memory from the higher-sized channel is then mapped for single-channel
operation.
According to Intel CPU spec, DIMM voltage below 1.5V is recommended to protect
®
the CPU.
Due to the memory address limitation on 32-bit Windows
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
- Use a maximum of 3 GB system memory if you are using a 32-bit Windows
- Install a 64-bit Windows
motherboard.
- For more details, refer to the Microsoft
com/kb/929605/en-us.
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value. To operate at the vendor-marked
or at a higher frequency, refer to section 2.5 Ai Tweaker menu for manual memory
frequency adjustment.
Always install the DIMMS with the same CAS Latency. For an optimum compatibility,
we recommend that you install memory modules of the same version or data code
(D/C) from the same vendor. Check with the vendor to get the correct memory
modules.
For system stability, use a more efficient memory cooling system to support a full
memory load (4 DIMMs) or overclocking condition.
Size SS/DS Chip Brand Chip NO.
4G SS N/A
4G SS N/A
4G SS N/A
8G DS TEAM
4G SS TEAM
SS N/A
8G DS N/A
Chip
Size SS/DS
Brand
SS N/A
4G SS N/A
4G SS N/A
4G SS N/A
4G SS SK HYNIX H5AN4G8NMFR
4G SS N/A
4G SS N/A
8G DS N/A
OS if you want to install 4GB or more on the
®
support site at http://support.microsoft.
®
Timing
Heat-Sink Package -
Heat-Sink Package -
Heat-Sink Package 15-15-15-35
T4D5128HT-30 16-16-16-36
T4D5128HT-30 16-16-16-36
Heat-Sink Package 15-17-17-35
Heat-Sink Package 15-16-16-39-65 1.35V
Chip NO. Timing
Heat-Sink Package 16-18-18-36
Heat-Sink Package -
Heat-Sink Package 16-16-16-36
Heat-Sink Package 16-18-18-36
16-16-16-36
Heat-Sink Package 16-18-18-36
Heat-Sink Package 16-16-16-36-52 1.2V
Heat-Sink Package 14-15-15-39-63 1.35V
Chapter 1: Product introduction
OS, when you install 4GB
®
®
DIMM socket support
(Optional)
Voltage
1 DIMM 2 DIMMs 4 DIMMs
1.35V • •
1.35V • •
1.35V • •
1.35V • •
1.35V • •
1.35V • •
• •
DIMM socket support
(Optional)
Voltage
1 DIMM 2 DIMMs 4 DIMMs
1.2V • •
1.35V • •
1.2V • •
1.2V • •
1.2V • •
1.25V • •
• •
• •
OS.
•
•
•
•
•
•
•
•
•
•
•
•
•
•