Setting Defaults; Menu Operations (Preset Settings/System Settings) - Denon DN-501C Owner's Manual

Setting Defaults

Menu Operations (Preset Settings/System Settings)

ON/STANDBY MENU
1
ON/STANDBY.
Press
The power of DN-501C is switched ON, and the display screen lights.
2
While DN-501C is stopped or in cue, press
The menu list is displayed.
• For details on the setting items in each menu, see "Menu List" (vpage 14).
3
Rotate the jog dial to select the setting item that you want to change, and press the
jog dial.
The menu list of the selected item is displayed.
4
Select the setting item that you want to change, and press the jog dial.
The setting item is chosen.
• To continue to set other items, perform the operation in step 3 again.
• To return to the upper level menu from the menu item currently being set, press
5
After you finish all settings, press
The changed settings are saved, and DN-501C returns to the stopped status.
2
To cancel the settings, press .
n Saving menu settings to USB memory
The DN-501C has a function for saving menu settings to USB media. This function is useful for sharing
the same settings from one DN-501C on multiple DN-501C units.
For details on the operations, see the separate "Save Setting" (vpage 18).
Jog Dial/
BACK ENTER
2
MENU
.
BACK
.
MENU
.
n Preset Setting
Item Setting Details (Items in bold are factory default)
Shift Mode
Momentary: Shift mode can be operated while pressing and holding the
Sets operations for the
button.
SHIFT
button. Lock: Shift mode will hold when the
SHIFT
button will light when in Shift mode.
Stop: A track is not played back when the power is switched on.
Power On
Sets the operation Resume Play: Start playback from the track that was played last by the previous
when the DN-501C operation.
power is switched on. Play First: Start playback at track #1 of the last folder or disc that you played
back during the previous operation.
NOTE
If the media that was previously being played back is removed while the unit
power is off, when the power is turned on again CD is selected in the stopped
status.
Play Range All: Plays back all of of the tracks in all folders.
Sets the track playback Folder: Plays back all of of the tracks in the selected folder.
range.
Play Mode Continuous: Plays back all tracks within the "Play Range" setting continually.
Sets the track playback Single: Plays back only 1 track.
mode.
On: Plays back tracks at random.
Random
Sets random playback. Off: Random playback is not performed.
On: Plays back tracks in the set order (programmed playback).
Program
Sets programmed Off: Programmed playback is not performed.
playback.
Finish Mode Stop: Playback is stopped at the start of the folder or disc.
Sets the operation Next: When playback is stopped, the start of the following track is cued.
when playback is Recue: Playback stops and returns to the cue point.
stopped.
Repeat On: Performs repeat playback according to the "Play Mode" settings.
Sets repeat playback. Off: Repeat playback is not performed.
Auto Cue Off: Does not function.
–48 dB: After a track has been selected, playback is cued at the point where the
volume level is less than –48 dB.
–42 dB: After a track has been selected, playback is cued at the point where the
volume level is less than –42 dB.
–36 dB: After a track has been selected, playback is cued at the point where the
volume level is less than –36 dB.
15 15
SHIFT
SHIFT
button is pressed and released. The