Electrolux GA60LVCN User Manual page 10

10 www.electrolux.com
6.4 Use of rinse aid and multi-
tablets
When you activate the option Multitab, the
rinse aid dispenser continues to release
rinse aid. However you can deactivate the
rinse aid dispenser. In this case the drying
results may not be satisfactory.
With the rinse aid dispenser deactivated,
the rinse aid indicator is always off.
How to deactivate the rinse aid
dispenser
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
to flash and the display is blank.
2. Press
• The indicators
• The indicator
• The display shows the current
3. Press
rinse aid dispenser deactivated.
The rinse aid indicator goes off.
4. Press the on/off button to confirm the
setting.
6.5 MyFavourite
With this option you can set and save the
programme that you use more frequently.
You can only save 1 programme. A new
setting cancels the previous one.
How to save the MyFavourite
programme
1. Set the programme that you want to
save
You can also set applicable options
together with the programme.
2. Press and hold
indicator comes on with fixed light.
, ,
.
,
off.
continues to flash.
setting: = rinse aid dispenser
activated.
to change the setting.
until the related
How to set the MyFavourite
programme
Press
6.6 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
and until
completed. By default this acoustic signal
is deactivated but it is possible to activate
and start
it.
How to activate the acoustic
and go
signal for the end of programme
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
=
2. Press
3. Press
4. Press the on/off button to confirm the
.
• The indicators that are related to
the MyFavourite programme and
options come on.
• The display shows the number and
the duration of the programme.
hold simultaneously
the indicators ,
to flash and the display is blank.
• The indicators
off.
• The indicator
flash.
• The display shows the current
setting: = Acoustic signal off.
to change the setting.
= Acoustic signal on.
setting.
and until
, and start
, and go
continues to