Sportsman GEN4000DF Instruction Manual page 32

(3) Any warranted part that is scheduled for replacement as required maintenance in your Owner's Manual is warranted
for the period of time before the first scheduled replacement date for that part. If the part fails before the first scheduled
replacement, the part will be repaired or replaced by Buffalo Corp. according to the Subject (4) below. Any
such part repaired or replaced under warranty will be warranted for the remainder of the period prior to the first scheduled
replacement point for the part.
(4) Repair or replacement of any warranted part under the warranty provisions herein must be performed at a warranty
station at no charge to the owner.
(5) Notwithstanding the provisions herein, warranty services or repair will be provided at all of our distribution centers
that are franchised to service the subject engines.
(6) The engine owner must not be charged for diagnostic labor that leads to the determination that a warranted part is in
fact defective, provided that such diagnostic work is performed at a warranty station.
(7) Buffalo Corp. is liable for damages to other engine components proximately caused by a failure
under warranty of any warranted part.
(8) Throughout the engine warranty period stated above, Buffalo Corp. will maintain a supply of warranted parts sufficient to
meet the expected demand for such parts.
(9) Any replacement part may be used in the performance of any warranty maintenance or repairs and must be provided
without charge to the owner. Such use will not reduce the warranty obligations of Buffalo Corp.
(10) Add-on or modified parts that are not exempted by the Air Resources Board may not be used. The use of any
non-exempted add-on or modified parts by the ultimate purchaser will be grounds for disallowing a warranty claims. Buffalo
Corp will not be liable to warrant failures of warranted parts caused by the use of a non-exempted add-on or
modifed part.
(11) The manufacturer issuing the warranty shall provide any documents that describe that manufacturer's warranty
procedures or policies within five working days of request by the Air Resources Board.
EMISSION WARRANTY PARTS LIST
(1) Fuel Metering System:
(a)Gasoline carburetor assembly and its internal components (b) Carburetor gaskets
(c) Fuel line (d) Clamps (e) Fuel tank
(f) Fuel line fittings (g) pressure regulator (if equipped)
(h) Mixer assembly and its internal components (if equipped)
(2) Air induction system including:
(a) Intake pipe/manifold (b) Air cleaner
(3) Ignition system including:
(a) Spark plug (b) Ignition coil
(4) Catalytic muffler assembly including:
(a)Muffler gasket (b) Exhaust manifold (c) Catalytic converter（if available）
(5) Crankcase breather assembly including
(a) Breather connection tube
(6) Fuel tank evaporative emissions control system including:
(a) Purge valves (b) Carbon canister (c) canister Mounting Brackets
(d) Fuel Cap (e) Fuel Tank
(7) Miscellaneous items used in above systems including:
(a) Switches (b) Hoses, belts connectors, and assemblies
(8) Air injection system
(a) Pulse valve
2015/11
GEN4000DF Portable Dual Fuel Generator
32