Connecting The Battery; Installing Exhaust Pipe; Connecting To Weld Output Terminals - Miller Electric Trailblazer 251 NT Owner's Manual

4-4. Connecting The Battery

Tools Needed:
3/8, 1/2 in

4-5. Installing Exhaust Pipe

Tools Needed:
1/2 in

4-6. Connecting To Weld Output Terminals

1
Y Connect negative (–)
Ref. ST-800 394-C / Ref. ST-189 925-A / Ref. S-0756-D
2 3
cable last.
–
+
.
Point exhaust pipe in desired
direction. If unit is truck or trailer
mounted, point pipe away from
direction of travel.
ST-801 681 / Ref. ST-189 925-A
Y Do not connect to CC and CV
terminals at the same time.
1 Work Weld Output Terminal
2 Stick/TIG (CC) Weld Output
Terminal
3 Wire (CV) Weld Output
Terminal
For MIG welding, connect work
cable to Work terminal and wire
feeder cable to Wire (CV) terminal.
For Stick/TIG welding, connect
work cable to Work terminal and
electrode holder cable to Stick/TIG
(CC) terminal.
ST-801 943-B / Ref. ST-189 925-A
OM-486 Page 15