Advertisement
4.
Remove the radio (four bolts, and unplug the
connector and antenna lead).
CONNECTOR
5.
Remove the left and right radio brackets (two
washer-screws for each bracket).
RADIO
LEFT RADIO
BRACKET
WASHER-SCREW
(Reuse.)
6.
Remove the pocket (two self-tapping screws), then
separate the radio and pocket. Set the pocket aside,
it will not be reused.
2 of 3
ANTENNA
LEAD
RADIO
BRACKET
BOLTS (4)
WASHER-
SCREW
(Reuse.)
RIGHT RADIO
BRACKET
SELF-TAPPING
POCKET
SCREW
BRACKET
7.
Position the cassette player on the radio, and
reinstall the left and right radio brackets and four
washer-screws removed in step 5. Use four
5 x 8 mm washer-screws (supplied) to secure the
cassette player to the radio brackets.
WASHER-SCREW
(resued)
5 x 8 mm
WASHER-SCREW
8.
Attach the harness clip to the back of the cassette
player with the remaining 5 x 8 mm washer-screw.
Plug the BUS cable into the rear of the radio/
cassette player; then fold the excess BUS cable
several times, and secure it to the back of the
cassette player with the harness clip.
CASSETTE
PLAYER
5 x 8 mm
WASHER-
SCREW
AII 24113 (0208)
RADIO/CD PLAYER
BUS CABLE
HARNESS CLIP
© 2002 American Honda Motor Co., Inc - All Rights Reserved.
5 x 8 mm
WASHER-
SCREW
Advertisement
