Traveling with your computer ..Accessing Lenovo programs ..Travel tips ....
Page 4
Setting the security chip ... Detaching a ThinkPad docking station . . . Using the fingerprint reader..Connecting external displays to a docking station .
Page 5
Lenovo Support Web site..Appendix B. WEEE and recycling Calling Lenovo ... . . statements ... . .
The information in this document does not alter the terms of your purchase agreement ® or the Lenovo Limited Warranty. For more information, see “Warranty Information” in the Safety, Warranty, and Setup Guide that comes with your computer.
Note: If you notice these conditions with a product (such as an extension cord) that is not manufactured for or by Lenovo, stop using that product until you can contact the product manufacturer for further instructions, or until you get a suitable replacement.
Although there are no moving parts in your computer after the power cord has been disconnected, the following warnings are required for your safety. CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Before replacing any CRUs, turn off the computer and wait three to five minutes to let the computer cool before opening the cover.
Do not attempt to disassemble or modify the battery pack. Attempting to do so can cause an explosion, or liquid leakage from the . A other than the one specified by Lenovo, or a disassembled or modified is not covered by the warranty.
• Do not operate your computer or charge the battery near flammable materials or in explosive environments. • Ventilation slots, fans and/or heat sinks are provided with the product for safety, comfort, and reliable operation. These features might inadvertently become blocked by placing the product on a bed, sofa, carpet, or other flexible surface.
50332-2 can be dangerous due to excessive sound pressure levels. If your Lenovo computer came with headphones or earphones in the package, as a set, the combination of the headphones or earphones and the computer already complies with the specifications of EN 50332-1.
Page 20
Figure 2. ThinkPad W541 front view Camera (on some models) Color sensor (on some models) ® Microphones TrackPoint pointing stick Power button NFC logo (on some models) ® Numeric keypad ThinkPad trackpad Fingerprint reader (on some models) TrackPoint buttons Camera (on some models) Use the camera to take pictures or hold a video conference.
ThinkPad trackpad TrackPoint buttons (on ThinkPad W541 only) The keyboard contains the Lenovo unique ThinkPad pointing device. Pointing, selecting, and dragging are all part of a single process that you can perform without moving your fingers from a typing position.
Note: You are responsible for evaluating, selecting, and implementing the locking device and security feature. Lenovo makes no comments, judgments, or warranties about the function, quality, or performance of the locking device and security feature.
Page 23
7: Start the Power Manager program, click the Global Power Settings tab, and then follow the instructions on the screen. • For Windows 8, Windows 8.1, and Windows 10: Start the Lenovo Settings program, click Power, and then follow the instructions on the screen.
USB 3.0 connector The USB 3.0 connector is used for connecting USB-compatible devices, such as a USB printer or a digital camera. Attention: When you attach a USB cable to this USB connector, ensure that the USB mark is facing upward. Otherwise the connector might be damaged.
SIM card slot If your computer supports the wireless wide area network (WAN) feature, a Subscriber Identification Module (SIM) card might be required to establish wireless WAN connections. Depending on the country or region of delivery, the SIM card might be already installed in the SIM card slot. For more information, see “Installing or replacing the SIM card”...
ac power connector Connect the ac power adapter to the ac power connector to provide ac power to the computer and charge the battery. Fan louvers (rear) The fan louvers and the internal fan enable air to circulate in the computer to ensure proper cooling, especially the cooling of the microprocessor.
There is no FCC ID or IC Certification number for the wireless communication cards shown on the enclosure of the computer. On some models, Lenovo provides you the information about the location of the FCC ID and IC Certification number label on the computer back cover assembly.
To remove the wireless WAN card for repair or replacement, see “Replacing a wireless WAN card” on page 87. Note: Use only Lenovo-authorized wireless communication cards for the computer. If you install an unauthorized wireless communication card that is not approved for use in your computer, an error message will be displayed and the computer will beep when you turn on the computer.
or Windows 10 that is preinstalled, your computer might have a Genuine Microsoft label affixed to its cover. See http://www.microsoft.com/en-us/howtotell/Hardware.aspx for illustrations of the various types of Genuine Microsoft labels. • In the People’s Republic of China, the Genuine Microsoft label is required on all computer models preinstalled with any version of Windows 8, Windows 8.1, or Windows 10.
• Camera (on some models) • Microphones Keyboard • 6-row keyboard or 6-row backlight keyboard (depending on the model) • ThinkPad pointing device • Function keys • Numeric keypad Interface • 4-in-1 media card slot • ac power connector • Audio connector •...
Size • Width: 376.6 mm (14.83 inches) • Depth: 248.1 mm (9.77 inches) • Height: 27.9 to 29.5 mm (1.10 inches to 1.16 inches) or 29.9 to 33.9 mm (1.18 inches to 1.33 inches) (depending on the model) Heat output (depending on the model) •...
3. If you still do not find the program on the Apps screen, search for the program in the search box. Some Lenovo programs are ready to be installed. You cannot find these programs through the above methods unless you have installed them first. To install these Lenovo programs, go to Lenovo PC Experience ➙...
Page 33
Use Companion to register your computer, access your user manual, manage system health and update, check the warranty status, and see accessories customized for your computer. You also can read hints and tips, explore Lenovo forums, and stay up-to-date on technology news with articles and blogs from trusted sources.
Page 34
Password Manager The Password Manager program automatically captures and fills in authentication information for Windows programs and Web sites. (Windows 7, Windows 8, and Windows 8.1) Power Manager The Power Manager program provides convenient, flexible, and complete power management for the computer. It enables you to adjust your computer power (Windows 7) settings to achieve the best balance between performance and power saving.
• “Using an ExpressCard, a flash media card, or a smart card” on page 41 Registering your computer When you register your computer, information is entered into a database, which enables Lenovo to contact you in case of a recall or other severe problem. In addition, some locations offer extended privileges and services to registered users.
Page 36
Can I get my user guide in another language? • To download the user guide in another language, go to http://www.lenovo.com/support. Then follow the instructions on the screen. How to turn off my computer? • For Windows 7: Open the Start menu, then click Shut down.
• Diagnose problems yourself by using the preinstalled diagnostic software. See “Diagnosing problems” on page 135. • Check for recovery solutions in Chapter 5 “Recovery overview” on page 63. Print the following sections and keep them with your computer in case you are unable to access this online user guide when necessary.
Page 38
Additional shortcut keys Your computer might have four additional shortcut keys: • : Launches calculator. • : Locks operating system. • : Opens the default browser. • : Opens Computer. Note: Depending on your computer model, the shortcut keys might not be available. Numeric keypad You can use this numeric keypad to input numbers quickly.
Page 39
When the Fn Lock function is enabled: The Fn Lock indicator is on. To input F1–F12, press the function keys directly. To initiate the special function printed as an icon on each key, press the Fn key and the corresponding function key. When the Fn Lock function is disabled: The Fn Lock indicator is off.
ThinkPad pointing device The ThinkPad pointing device enables you to perform all the functions of a traditional mouse, such as moving the pointer, left-clicking, right-clicking, and scrolling. With the ThinkPad pointing device, you also can perform a variety of touch gestures, such as rotating and zooming in or out. Using the ThinkPad pointing device Depending on the model, the pointing device on your computer might look like either of the following illustrations.
Page 41
ThinkPad pointing device with TrackPoint buttons This type of ThinkPad pointing device consists of the following components: TrackPoint pointing device Trackpad By default, both the TrackPoint pointing device and the trackpad are active with the touch gestures enabled. To change the settings, see “Customizing the ThinkPad pointing device” on page 28. TrackPoint pointing device The TrackPoint pointing device enables you to perform all the functions of a traditional mouse, such as pointing, clicking, and scrolling.
Page 42
• Point Use the TrackPoint pointing stick to move the pointer on the screen. To use the pointing stick, apply pressure to the pointing-stick nonslip cap in any direction parallel to the keyboard. The pointer moves accordingly but the pointing stick itself does not move. The speed at which the pointer moves depends on the amount of pressure you apply to the pointing stick.
Page 43
With the trackpad, you also can perform a variety of touch gestures. For information about using the touch gestures, see “Trackpad touch gestures” on page 27. ThinkPad pointing device without TrackPoint buttons This type of ThinkPad pointing device consists of the following components: Pointing stick Trackpad Depending on your preference, you can use the pointing device in one of the following modes:...
Page 44
Point Use the pointing stick to move the pointer on the screen. To use the pointing stick, apply pressure to the pointing stick nonslip cap in any direction parallel to the keyboard. The pointer moves accordingly but the pointing stick itself does not move.
Point Use the pointing stick to move the pointer. To use the pointing stick, apply pressure to the nonslip cap on the pointing stick in any direction parallel to the keyboard. The pointer moves accordingly but the pointing stick itself does not move.
The following section introduces some touch gestures on the Windows 8 and Windows 8.1 operating system. Swipe from the top edge Swipe from the top to the bottom From the Start screen or the edge current app, swipe in from Swipe from the top to the bottom the top edge of the trackpad edge of the trackpad with one...
Power management When you use your computer away from electrical outlets, you depend on battery power to keep your computer running. Different computer components consume power at different rates. The more you use the power-intensive components, the faster you consume battery power. Spend more time unplugged with ThinkPad batteries.
Connecting the ac power adapter To connect the ac power adapter, do the following. Note: Ensure that you perform the actions in the following order: 1. Connect the power cord to the ac power adapter. 2. Connect the ac power adapter to the power connector of the computer. 3.
– For Windows 7: Start the Power Manager program and then click the Power Plan tab. Then follow the instructions on the screen. For instructions on how to start the Power Manager program, see “Accessing Lenovo programs” on page 14. – For Windows 8 and Windows 8.1: Right-click the battery status icon in the windows notification area and click Power Options, and then click Change plan settings that is next to your power plan.
Note: If an unauthorized battery is installed, the following message will be displayed: “The battery installed is not supported by this system and will not charge. Please replace the battery with the correct Lenovo battery for this system.”...
DANGER Only recharge the battery pack strictly according to instructions included in the product documentation. DANGER Do not put the battery pack in trash that is disposed of in landfills. When disposing of the battery, comply with local ordinances or regulations and your company's safety standards. DANGER There is a danger of an explosion if the coin-cell battery is incorrectly placed.
• NFC connection Using the wireless LAN connection A wireless local area network (LAN) covers a relatively small geographic area, such as an office building or a house. Devices based on the 802.11 standards can connect to this type of network. Your computer comes with a built-in wireless network card and a configuration utility to help you establish wireless connections and monitor the connection status.
Page 53
Access Connections wireless status icon: • Power to the wireless radio is off. • Power to the wireless radio is on. No association. • Power to the wireless radio is on. No signal. • Power to the wireless radio is on. The signal strength of the wireless connection is excellent. •...
Page 54
Access Connections status icon: • No location profile is active or none exists. • Current location profile is disconnected. • Current location profile is connected. Access Connections wireless status icon: • Power to the WAN radio is off • No association •...
can establish the radio communications between your computer and another NFC-enabled device over a distance no more than a few centimeters. By default, the NFC feature is enabled. If the NFC feature of your computer is disabled, do the following to enable the NFC feature: •...
Note: When you connect an external display, a video interface cable with a ferrite core is required. 1. Connect the external display to an appropriate video connector on your computer, such as the VGA connector, mini DisplayPort connector, or HDMI connector. 2.
® Note: If you show DOS or programs using DirectDraw or Direct3D in full-screen mode, only the main display shows the video output. Changing display settings You can change the settings for both the computer display and the external display. For example, you can define which one is the main display and which one is the secondary display.
To start the camera, do the following: • For Windows 7: Start the Communications Utility program. See “Accessing Lenovo programs” on page 14. • For Windows 8 and Windows 8.1: Click Camera from the Start screen.
– Configure the camera settings directly from the program that is using the camera. For more information, see the help information system of the program. – Click Lenovo Settings from the Start screen. Then click Camera. Follow the instructions on the screen to configure the camera settings as desired.
• Length: 85.60 mm (3.37 inches) • Width: 53.98 mm (2.13 inches) • Thickness: 0.76 mm (0.03 inch) Do not insert smart cards with slits into your computer. Otherwise, the smart card reader might get damaged. Attention: While transferring data to or from a flash media card, or a smart card, do not put your computer into sleep or hibernation mode before the data transfer is completed;...
Removing an ExpressCard, a flash media card, or a smart card Attention: • Before removing a card, stop the card first. Otherwise, data on the card might be corrupted or lost. • Do not remove a card while the computer is in sleep mode or hibernation mode. Otherwise, the system might not respond when you try to resume operation.
The following topics provide information about arranging your work area, setting up your computer equipment, and establishing healthy work habits. Lenovo is committed to providing the latest information and technology to our customers with disabilities. Refer to the accessibility information that outlines our efforts in this area. See “Accessibility information”...
Accessibility information Lenovo is committed to providing users who have hearing, vision, and mobility limitations with greater access to information and technology. This section provides information about the ways to help these users get the most out of their computer experience.
Page 65
For more information, go to http://windows.microsoft.com/, and then type any of the following keywords for searching: keyboard shortcuts, key combinations, shortcut keys. Ease of Access Center Ease of Access Center on the Windows operating system enables users to configure their computers to suit their physical and cognitive needs.
Page 66
Screen-reader technologies Screen-reader technologies are primarily focused on software program interfaces, help information systems, and various online documents. For additional information about screen readers, see the following: • Using PDFs with screen readers: http://www.adobe.com/accessibility.html?promoid=DJGVE • Using the JAWS screen reader: http://www.freedomscientific.com/jaws-hq.asp •...
1. Documentation in accessible formats Lenovo provides electronic documentation in accessible formats, such as properly tagged PDF files or HyperText Markup Language (HTML) files. Lenovo electronic documentation is developed to ensure that visually impaired users can read the documentation through a screen reader. Each image in the documentation also includes adequate alternative text so that visually impaired users can understand the image when they use a screen reader.
Page 68
• External storage device If you are traveling to another country, you might want to consider an ac power adapter for the country to which you are travelling. To purchase travel accessories, go to http://www.lenovo.com/accessories. User Guide...
Note: You might want to record your password and store it in a safe place. Otherwise, if you forget the password, you have to take your computer to a Lenovo reseller or a marketing representative to have the password canceled.
ThinkPad Setup program, you will be prompted to type your supervisor password to proceed. If you forget your supervisor password, Lenovo cannot reset your password. You must take your computer to a Lenovo reseller or a Lenovo marketing representative to have the system board replaced. Proof of purchase is required, and a fee will be charged for parts and service.
Page 72
The master hard disk password also requires a user hard disk password. The master hard disk password is usually set and used by a system administrator. It enables the administrator to access any hard disk drive in a system like a master key. The administrator sets the master password; then assign a user password for each computer in the network.
Lenovo cannot reset your passwords or recover data from the hard disk drive. You must take your computer to a Lenovo reseller or a marketing representative to have the hard disk drive replaced. Proof of purchase is required, and a fee will be charged for parts and service.
• If a Disk Encryption storage drive is installed in your computer, be sure to protect the contents of your computer memory from unauthorized accesses by use of drive encryption software, such as Microsoft ® Windows BitLocker Drive Encryption. See “Using Windows BitLocker Drive Encryption” on page 56. •...
To set the security chip, you have to start Client Security Solution, and follow the instructions on the screen. Note: If Client Security Solution is not preinstalled on your computer, download and install it from http://www.lenovo.com/support. Then follow the instructions on the screen. Tips on using the security chip •...
Page 76
For more information on how to use the fingerprint reader, refer to the help system of the Fingerprint Manager Pro program. • For Windows 10 1. Open the Start menu and then click Settings. If Settings is not displayed, click All apps to display all programs, and then click Settings ➙...
Page 77
If you forget your hard disk password, Lenovo cannot reset your password or recover data from the hard disk drive. You must take your computer to a Lenovo authorized servicer or a marketing representative to have the hard disk drive replaced. Proof of purchase is required, and a fee will be charged for parts and service.
• Reader Priority: Defines the priority for the fingerprint readers if an external fingerprint reader is attached. • Security Mode: Specifies the settings of the security mode. • Password Authentication: Enables or disables the password authentication. Note: This item is displayed only if High security mode is enabled. •...
• Using the recovery program provided by Lenovo to bring the hard disk drive or solid-state drive back to the factory default settings. These operations, however, only change the file location of the data; they do not delete the data itself. In other words, the data retrieval processing is disabled under an operating system such as Windows.
• “Recovery overview for the Windows 8 and Windows 8.1 operating systems” on page 68 Recovery overview for the Windows 7 operating system This section provides information about the recovery solutions provided by Lenovo on the Windows 7 operating system.
This section provides instructions on how to perform a backup operation using the Rescue and Recovery program. 1. From the Windows desktop, click Start ➙ All Programs ➙ Lenovo PC Experience ➙ Lenovo Tools ➙ Enhanced Backup and Restore. The Rescue and Recovery program opens.
This section provides instructions on how to perform a recovery operation using the Rescue and Recovery program. 1. From the Windows desktop, click Start ➙ All Programs ➙ Lenovo PC Experience ➙ Lenovo Tools ➙ Enhanced Backup and Restore. The Rescue and Recovery program opens.
Creating a rescue medium This section provides instructions on how to create a rescue medium. 1. From the Windows desktop, click Start ➙ All Programs ➙ Lenovo PC Experience ➙ Lenovo Tools ➙ Enhanced Backup and Restore. The Rescue and Recovery program opens.
Attention: If you need updated device drivers for your computer, do not download them from the Windows Update Web site. Obtain them from Lenovo. For more information, see “Making sure device drivers are current” on page 130.
• Use recovery media if all other methods of recovery have failed and you need to restore the hard disk drive to the factory default settings. See “Creating and using a recovery media” on page 63. Note: If you are unable to access the Rescue and Recovery workspace or the Windows environment from a rescue medium or recovery media, you might not have the rescue device (an internal hard disk drive, a disc, a USB hard disk drive, or other external devices) set as the first boot device in the startup device sequence.
Attention: If you reset the computer to the factory default settings, all your personal files and settings will be deleted. To avoid data loss, make a backup copy of all the data that you want to keep. To reset your computer to the factory default settings, do the following: 1.
Creating and using recovery media You can create recovery media as backups for the Windows recovery environment and the Windows recovery image. If you cannot start the computer, you can use recovery media to troubleshoot and fix the problems on your computer. It is recommended that you create recovery media as early as possible.
Note: Ensure that your computer is connected to ac power. 1. Turn on or restart the computer. Before the Windows operating system starts, repeatedly press the F12 key. The Boot Menu window opens. 2. Select the recovery drive as the boot device. 3.
Recovering your operating system if Windows 10 fails to start The Windows recovery environment on your computer is capable of operating independently from the Windows 10 operating system. This enables you to recover or repair the operating system even if the Windows 10 operating system fails to start.
Replacing the battery pack Before you start, print these instructions. This system supports only batteries specially designed for this specific system and manufactured by Lenovo or an authorized builder. The system does not support unauthorized batteries or batteries designed for other systems.
Page 92
Attention: Lenovo has no responsibility for the performance or safety of unauthorized batteries, and provides no warranties for failures or damage arising out of their use. DANGER If the rechargeable battery pack is incorrectly replaced, there is danger of an explosion. The battery pack contains a small amount of harmful substances.
4. Insert a new battery pack until it clicks into place. 5. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Installing or replacing the SIM card Before you start, print these instructions. SIM card is a small plastic card with an Integrated Circuit (IC) chip mounted on one side of the card.
5. Hold the new SIM card with the metal contact facing upward and going into the slot first. Then, insert the new SIM card firmly into the slot until it clicks into place. 6. Reinstall the battery pack. See “Replacing the battery pack” on page 73. 7.
Page 95
5. Remove the screw that secures the Ultrabay device. 6. Push out the Ultrabay device to let part of it exposed . If necessary, you can use a tool, such as a ball pen. And then pull the Ultrabay device out of the computer Chapter 6 Replacing devices...
Page 96
7. Insert the new Ultrabay device into the bay. 8. Reinstall the screw to secure the Ultrabay device. User Guide...
9. Reinstall the large bottom cover , and then tighten the screws 10. Reinstall the battery pack. See “Replacing the battery pack” on page 73. 11. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing a memory module Before you start, print these instructions.
Page 98
4. Loosen the screws , and then remove the large bottom cover 5. Open the latches on both sides of the memory slot at the same time , and then remove the memory module . Save the removed memory module for future use. User Guide...
6. Place the notched end of the new memory module toward the contact edge side of the memory slot, and insert the memory module into the memory slot at an angle of about 20 degrees . Pivot the memory module downward until it snaps into place .
Page 100
• Replace the hard disk drive or solid-state drive only if you upgrade it or have it repaired. The connectors and slot of the hard disk drive or solid-state drive are not designed for frequent changes, or drive swapping. • Do not drop the drive or subject it to physical shocks. Put the drive on a material, such as soft cloth, that absorbs any physical shocks.
Page 101
6. Remove the hard disk drive or solid-state drive. 7. Install the new hard disk drive or solid-state drive in place. 8. Reinstall the screw to secure the hard disk drive or solid-state drive. Chapter 6 Replacing devices...
9. Reinstall the large bottom cover , and then tighten the screws 10. Reinstall the battery pack. See “Replacing the battery pack” on page 73. 11. Turn the computer over again. Connect the ac power adapter and all cables to the computer. Replacing a wireless LAN card Before you start, print these instructions.
Page 103
4. Loosen the screw , and then remove the small bottom cover 5. If a tool is provided with the new wireless LAN card to help you disconnect cables, use the tool to disconnect the cables from the wireless LAN card. If no such a tool is provided, hold the cable connector with your fingers and gently disconnect each cable from the wireless LAN card.
Page 104
7. Carefully remove the wireless LAN card out of the slot. 8. Align the contact edge of the new wireless LAN card with the key in the slot. Then carefully insert the new wireless LAN card into the slot at an angle of about 20 degrees. 9.
10. Connect the antenna cables to the wireless LAN card. Ensure that you attach the gray cable to the main connector and the black cable to the auxiliary connector on the wireless LAN card. 11. Reinstall the small bottom cover .
Page 106
Attention: Before you start installing a wireless WAN card, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. Static electricity could damage the card. Your computer might be equipped with a wireless WAN card. To replace the wireless WAN card, doing the following: 1.
Page 107
6. Remove the screw. The wireless WAN card is released from the secured position and pivots upward. 7. Carefully remove the wireless WAN card out of the slot. 8. Align the contact edge of the new wireless WAN card with the key in the slot. Then carefully insert the new wireless WAN card into the slot at an angle of about 20 degrees.
Page 108
9. Pivot the wireless WAN card downward , and then install the screw to secure the wireless WAN card in place 10. Connect the antenna cables to the wireless WAN card. Ensure that you attach the red cable to the main connector and the blue cable to the auxiliary connector on the wireless WAN card.
If the coin-cell battery is incorrectly replaced, there is danger of an explosion. The coin-cell battery contains a small amount of harmful substances. To avoid possible injury: • Replace only with a battery of the type recommended by Lenovo. • Keep the battery pack away from fire.
Page 110
5. Detach the connector , and then remove the coin-cell battery 6. Install the new coin-cell battery , and then attach the connector 7. Reinstall the small bottom cover . Then tighten the screw 8. Reinstall the battery pack. See “Replacing the battery pack” on page 73. 9.
Replacing the keyboard Before you start, print these instructions. DANGER During electrical storms, do not perform any replacement and do not connect the telephone cable to or disconnect it from the telephone outlet on the wall. DANGER Electric current from power, telephone, and communication cables is hazardous. To avoid shock hazard, disconnect the cables before opening the cover of this slot.
Page 112
5. To reveal the screw heads beneath the keyboard frame, slide the keyboard frame forward by 2.5 mm (0.1 inch) with the flat end of the keyboard multi-tool. 6. Loosen the screws that secure the keyboard with the cross end of the keyboard multi-tool. User Guide...
Page 113
7. Pivot the keyboard slightly upward until you can see the connectors on the bottom side of the keyboard. Then turn over the keyboard 8. Gently put the keyboard on the palm rest and detach the connectors. Then remove the keyboard. Installing the new keyboard To install the new keyboard, do the following: Chapter 6...
Page 114
1. Attach the connectors and then turn over the keyboard. 2. Insert the keyboard into the space under the frame of the keyboard bezel as shown. Ensure that the front edge of the keyboard is under the frame of the keyboard bezel. User Guide...
Page 115
3. Reveal the screw heads by sliding the keyboard frame forward with the flat end of the keyboard multi-tool. Ensure that the screw heads are exposed completely. 4. Tighten the screws with the cross end of the keyboard multi-tool to secure the keyboard in place. Chapter 6 Replacing devices...
Page 116
5. Slide the keyboard frame backward by 2.5 mm (0.1 inch) with the flat end of the keyboard multi-tool. Hide the latches of the keyboard frame under the keyboard bezel by pushing the latches with your finger as shown. 6. Adjust the keyboard frame in place with the flat end of the keyboard multi-tool to ensure that all the latches are secured under the keyboard bezel.
You can shop at Lenovo 24 hours a day, 7 days a week directly over the World Wide Web. All you need is an Internet connection and a credit card.
Page 118
ThinkPad Basic Dock Front view Power button: Press the power button to turn on or turn off the computer . Eject button: Press the eject button to release the computer from the docking station. Sliding adjuster: Use the sliding adjuster as a guide to align the docking station connector on your computer when you attach the docking station.
Page 119
Ethernet connector: Used to connect the docking station to an Ethernet LAN. Note: If you need to use an Ethernet connector or an external monitor connector when your computer is attached to a docking station, use the Ethernet connector or the external monitor connector on the docking station, instead of the one on the computer.
Page 120
Rear view Always-On USB connector: Used to connect devices that are compatible with USB 2.0 or charge some mobile digital devices and smartphones when your computer is in sleep or hibernation mode. USB 2.0 connectors: Used to connect devices that are compatible with USB 2.0. USB 3.0 connectors: Used to connect devices that are compatible with USB 3.0.
Page 121
ThinkPad Ultra Dock Front view Power button: Press the power button to turn on or turn off the computer. Key lock indicator: This indicator turns on when the system lock key is in the locked position. Docking status indicator: This indicator turns on when your computer is docked. Eject button: Press the eject button to release the computer from the docking station.
Always-On USB connector: Used to connect devices that are compatible with USB 2.0 or charge some mobile digital devices and smartphones when your computer is in sleep or hibernation mode. USB 2.0 connectors: Used to connect devices that are compatible with USB 2.0. USB 3.0 connectors: Used to connect devices that are compatible with USB 3.0.
3. Align the top-left corner of the computer with the position mark of the docking station. Attach your computer to the docking station vertically until you hear a click . Then turn the system lock key to the locked position 4.
3. Press the eject button until the computer moves up. Then, grasp both sides of the computer to remove it. Connecting external displays to a docking station You can connect multiple external displays to a supported ThinkPad docking station. To ensure that the multiple displays work correctly, observe the following guidelines and connect the displays to appropriate connectors.
– ThinkPad Ultra Dock • For the ThinkPad Ultra Dock, a maximum of three displays (including your computer display) can work at the same time. As a result, if you connect three external displays to the ThinkPad Ultra Dock, the display connected to the VGA connector will not work when your computer display is on.
Page 126
• When the key is in the locked position (position 1), the eject button of the docking station is locked, and you cannot remove your computer. The key lock indicator is on when the eject button is locked. • When the key is in the unlocked position (position 2), the eject button of the docking station is unlocked, and you can remove your computer.
7. After installing the device drivers, apply Windows Update to get the latest modules, for example the security patches. 8. Depending on your preference, install Lenovo programs. For information about Lenovo programs, see “Lenovo programs” on page 14. Note: After installing the operating system, do not change the initial UEFI/Legacy Boot setting in the ThinkPad Setup program.
USB 3.0 driver. To download the latest device drivers, do the following: 1. Go to http://www.lenovo.com/ThinkPadDrivers. 2. Select your product name to view all the device drivers for your computer. 3. Select the device drivers you that you need, and follow the instructions on the screen.
Note: You can press the F9 key to restore to the default settings. Main menu When you enter the ThinkPad Setup program, you will first see the Main menu as follows: • UEFI BIOS Version • UEFI BIOS Date (Year-Month-Day) •...
Page 131
Table 2. Config menu items (continued) Menu item Submenu item Selection Comments • The magic packet type Wake on LAN requires ac power. • The Wake on LAN function does not work when a hard disk password is set. Ethernet LAN Option ROM •...
Page 132
Table 2. Config menu items (continued) Menu item Submenu item Selection Comments If you select Enabled, it enables USB 3.0 mode and allows USB 3.0 to be supported in the operating system. If you select Disabled, it disables and hides the USB 3.0 controller, and USB 3.0 connectors will work as USB 2.0 connectors.
Page 133
Table 2. Config menu items (continued) Menu item Submenu item Selection Comments condition; then press the desired function key. The action is equivalent to pressing the required key simultaneously with the Fn key. When you press the Fn key twice, the state is locked until you press the Fn key again.
Page 134
Table 2. Config menu items (continued) Menu item Submenu item Selection Comments • Balanced Maximize Performance: Reduce microprocessor Scheme for Battery throttling. • Maximize Performance Balanced: Balance • Balanced sound, temperature, and performance. Note: Each scheme affects fan sound, temperature, and performance.
Page 135
Table 2. Config menu items (continued) Menu item Submenu item Selection Comments Intel Rapid Start Technology • Disabled To use this feature, a special partition on the solid-state • Enabled drive is required. Enter after: When enabled, the • Immediately computer enters a lower power state after the •...
Table 2. Config menu items (continued) Menu item Submenu item Selection Comments Intel AMT Intel AMT Control • Disabled If you select Enabled, Intel Active Management • Enabled Technology (AMT) is • Permanently Disabled configured and additional setup items are provided in Management Engine BIOS Extension (MEBx) Setup.
Page 137
The following table lists the Security menu items. Default values are in boldface. The menu items might change without notice. Depending on the model, the default value might vary. Attention: The default configurations are already optimized for you. Improper change of the configurations might cause unexpected results.
Page 138
Table 3. Security menu items (continued) Menu item Submenu item Selection Comments access, set the user authentication on the operating system. Set Minimum Length • Disabled Specify a minimum length for the power-on password • x characters and hard disk password. (4≤x≤12) By default, this is set to Disabled.
Page 139
Table 3. Security menu items (continued) Menu item Submenu item Selection Comments UEFI BIOS Update Option Flash BIOS Updating by • Disabled If you select Enabled, End-Users all users can update the • Enabled UEFI BIOS. If you select Disabled, only the person who knows the supervisor password can update the UEFI BIOS.
Page 140
Table 3. Security menu items (continued) Menu item Submenu item Selection Comments Physical Presence for • Disabled Enable or disable the Provisioning confirmation message • Enabled when you change the settings of the security chip. Physical Presence for Clear • Disabled Enable or disable the confirmation message •...
Page 141
Table 3. Security menu items (continued) Menu item Submenu item Selection Comments Ultrabay (HDD/Optical) • Disabled If you select Enabled, you can use the Ultrabay • Enabled device. Memory Card Slot • Disabled If you select Enabled, you can use the memory card •...
Page 142
Table 3. Security menu items (continued) Menu item Submenu item Selection Comments The Intel anti-theft suspend screen will be displayed at next boot to enter the suspend mode. Computrace • Disabled Enable or disable the UEFI BIOS interface to activate •...
Table 3. Security menu items (continued) Menu item Submenu item Selection Comments the original signature databases including certificate for Windows 8, Windows 8.1, and Windows 10 operating systems. Startup menu To change the startup settings of your computer, select the Startup tab from the ThinkPad Setup menu. Attention: •...
Table 4. Startup menu items (continued) Menu item Selection Comments bootable devices that do not have the • No UEFI-enabled operating system. Compatibility Support Module (CSM) is required for starting the legacy operating system. If you select UEFI Only, CSM Support is selectable. For Both or Legacy Only mode, CSM Support is not selectable.
Windows environment. When you install a new program, a device driver, or hardware, you might be informed to update the UEFI BIOS. For instructions on how to update the UEFI BIOS, go to: http://www.lenovo.com/ThinkPadDrivers Using system management This topic is primarily intended for the network administrators.
Setting management features To enable a network administrator to remotely control your computer, set the following system-management features in the ThinkPad Setup program: • Wake on LAN • Network Boot sequence • Flash update Note: If a supervisor password has been set, you will be required to enter the supervisor password when you start the ThinkPad Setup program.
• Profile your machine at http://www.lenovo.com/support to keep up to date with current drivers and revisions. • Keep up to date for device drivers on other non-Lenovo hardware. You might want to read the device driver information release notes prior to updating for compatibility or known issues.
This might eliminate the driver as the potential cause of a problem. Getting the latest drivers from the Web site You can download and install updated device drivers from the Lenovo Support Web site by doing the following: 1. Go to http://www.lenovo.com/ThinkPadDrivers.
For more information about how to use the System Update program, refer to the help information system of the program. Taking care of your computer Although your computer is designed to function reliably in normal work environments, you need to use common sense in handling it.
Taking care when setting passwords • Remember your passwords. If you forget a supervisor or hard disk password, Lenovo will not reset it, and you might have to replace your system board, hard disk drive, or solid-state drive. Taking care of the fingerprint reader The following actions could damage the fingerprint reader or cause it not to work properly: •...
Page 151
2. Absorb the diluted detergent into a sponge. 3. Squeeze excess liquid from the sponge. 4. Wipe the cover with the sponge, using a circular motion and taking care not to let any excess liquid drip. 5. Wipe the surface to remove the detergent. 6.
Windows 10, you can find the latest information about diagnostics for your computer at: http://www.lenovo.com/diagnose When you are setting up your computer, the Lenovo Solution Center program prompts you to create recovery media. You can use the recovery media to restore the hard disk drive to the factory default state. For more information, see “Performing backup and recovery operations”...
2. While the computer is turned off, remove all power sources from the computer (battery and the ac power adapter). Hold down the power button for 10 seconds. Plug in the ac power adapter while keeping the battery out of the computer. If the computer does not turn back on, continue with step 3. Note: Once the computer starts up and enters the Windows environment, use the proper shutdown procedure to turn the computer off.
Page 155
• Message: 0187: EAIA data access error. Solution: The access to EEPROM is failed. Have the computer serviced. • Message: 0188: Invalid RFID Serialization Information Area. Solution: The EEPROM checksum is not correct (block # 0 and 1). The system board should be replaced, and the box serial number needs to be reinstalled.
• Message: 2201: Machine UUID is invalid. Solution: Machine UUID is invalid. Have the computer serviced. • Message: Fan error Solution: Cooling fan has failed. Turn off the computer immediately and have the computer serviced. • Message: Thermal sensing error Solution: The thermal sensor is not functioning correctly.
Beep errors Table 5. Beep errors Problem Solution Have the computer serviced. One short beep, pause, three short beeps, pause, three more short beeps, and one short beep Three short beeps, pause, one short beep, pause, one Turn off the computer and remove the device from the more short beep, and three short beeps ExpressCard slot.
2. If the exclamation mark ! is displayed next to the adapter name under Network adapters, you might not be using the correct driver or the driver might have been disabled. To update the driver, right-click the highlighted adapter. 3. Click Update Driver Software, and then follow the instructions on the screen. –...
For the Windows 7 operating system, check the Network Name (SSID) and your encryption information. Use the Access Connections program to verify this case-sensitive information. A wireless WAN problem Problem: A message is displayed indicating that an unauthorized WAN card is installed. Solution: The WAN card is not supported on this computer.
Solution: If an external numeric keypad is connected: 1. Turn off the computer. 2. Remove the external numeric keypad. 3. Turn on the computer and try using the keyboard again. If the keyboard problem is resolved, carefully reconnect the external numeric keypad and the external keyboard.
6. Click the Properties button. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. Check the Device status box and make sure that the device is working correctly. If not, click the Troubleshoot button and follow the instructions on the screen. 7.
– The monitor information is correct and the appropriate monitor type is selected. Refer to the solution to the above problem. – Make sure that an appropriate refresh rate is selected by doing the following: 1. Connect the external monitor to the monitor connector, and then connect the monitor to an electrical outlet.
Page 163
1. Open Control Panel. 2. Click Hardware and Sound. 3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. 4. Double-click Sound, video and game controllers. 5. Make sure that the following device is enabled and configured correctly. •...
Fingerprint reader problems • Problem: The surface of the reader is dirty, stained, or wet. Solution: Gently clean the surface of the reader with a dry, soft, lint-free cloth. • Problem: The reader often fails to enroll or authenticate your fingerprint. Solution: If the surface of the reader is dirty, stained, or wet, gently clean the surface of the reader with a dry, soft, lint-free cloth.
If you receive an error message while the operating system is loading the desktop configuration after the POST is completed, check the following items: 1. Go to the Lenovo Support Web site at http://www.lenovo.com/support and search for the error message. 2. Go to the Microsoft Knowledge Base homepage at http://support.microsoft.com/ and search for the error message.
If the battery is charged and the temperature is within range, have the computer serviced. • Problem: A critical low-battery error occurs, and the computer immediately turns off. Solution: The battery power is getting low. Plug the ac power adapter into an electrical outlet and connect the ac power adapter to the computer, or replace the battery with a charged one.
Solution: On the Startup menu of ThinkPad Setup, make sure that the hard disk drive is on the Boot priority order list. If it is on the Excluded from boot order list, it is disabled. Select the entry for it on the list and press Shift+1 to move it back to the Boot priority order list.
• Problem: The computer cannot play a CD, or the sound quality is not good. Solution: Ensure that the disc meets the standards for your country. Usually, a disc that meets the local standards is marked with a CD logo on the label. If you use a disc that does not meet these standards, we cannot guarantee that it will play, or that, if it does play, the sound quality will be good.
Lenovo to assist you. This section contains information about where to go for additional information about Lenovo and our products, what to do if you experience a problem with your computer, and whom to call for service should it be necessary.
• Lenovo hardware repair - If the problem is determined to be caused by Lenovo hardware under warranty, trained service personnel are available to provide the applicable level of service.
• Installation and maintenance of network operating systems (NOS) • Installation and maintenance of application programs For the terms and conditions of the Lenovo Limited Warranty that applies to your Lenovo hardware product, see “Warranty information” in the Safety, Warranty, and Setup Guide that comes with your computer.
Wireless LAN antenna (auxiliary) Wireless LAN antenna (main) Wireless related information Wireless interoperability Wireless LAN card is designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS), Complementary Code Keying (CCK), and/or Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to: •...
Due to the fact that integrated wireless cards operate within the guidelines found in radio frequency safety standards and recommendations, Lenovo believes they are safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
• Consult an authorized dealer or service representative for help. Lenovo is not responsible for any radio or television interference caused by using other than specified or recommended cables and connectors or by unauthorized changes or modifications to this equipment.
This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility. Lenovo cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the installation of option cards from other manufacturers.
Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen - CE - zu führen. Verantwortlich für die Konformitätserklärung nach Paragraf 5 des EMVG ist die Lenovo (Deutschland) GmbH, Gropiusplatz 10, D-70563 Stuttgart. Informationen in Hinsicht EMVG Paragraf 4 Abs. (1) 4: Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse B.
Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.
If you need to replace it with a new one, contact your place of purchase or contact Lenovo for service. If you need to dispose of a disused lithium battery, insulate it with vinyl tape, contact your place of purchase or an industrial-waste-disposal operator, and follow their instructions.
For proper collection and treatment, go to: http://www.lenovo.com/lenovo/environment Battery recycling information for Taiwan Battery recycling information for the United States and Canada...
(RoHS) European Union RoHS Lenovo products sold in the European Union, on or after 3 January 2013 meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2”).
Turkish RoHS The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Waste Electrical and Electronic Equipment (WEEE). Ukraine RoHS Appendix C. Restriction of Hazardous Substances Directive (RoHS)
Windows help information on the computer. The Wake on LAN function is enabled when your Lenovo computer is shipped from the factory, and the setting remains valid even when the computer is in sleep mode. If you do not need to have Wake on LAN enabled while the computer is in sleep mode, you can reduce the power consumption and prolong the time in sleep mode, by disabling the setting of Wake on LAN for sleep mode.
Page 188
5. Clear the Allow this device to wake the computer check box. 6. Click OK. User Guide...
Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Access Connections Active Protection System Lenovo Secure Data Disposal ThinkPad TrackPoint Ultrabay UltraConnect Intel, Intel SpeedStep, and Thunderbolt are trademarks of Intel Corporation in the U. S. and/or other countries.