Connecting Shielding Gas (Optional); Installing Welding Wire And Adjusting Hub Tension - Miller Electric S-32SL Owner's Manual

2-5. Connecting Shielding Gas (Optional)

1
Tools Needed:
5/8 in

2-6. Installing Welding Wire And Adjusting Hub Tension

4
3
Tools Needed:
15/16 in
OM-1546 Page 12
2
1
6
1 Gas Hose With 5/8-18 Right-
hand Thread Fittings (Cus-
tomer Supplied)
1 Retaining Ring
2 Wire Spool
3 Hub
4 Spool Support
If necessary, move hub on support
for use of different size wire spool.
Remove retaining ring, and install
spool so hub pin fits spool hole. Re-
install retaining ring.
5
5 Hub Tension Adjustment Nut
Adjust tension nut so only a slight
force is needed to turn spool.
6 Adapter Plates (Optional)
7 Spacer
Insert tabs on spool through holes
in adapter plates and bend over.
7
Ref. ST-158 788 / ST-091 601-A
Ref. ST-158 789