Specifications; Warranty And Registration - Sapphire Audio SS-P 150 User Instructions

Portable extractors
Table of Contents

Advertisement

Available languages

Available languages

Clean the solution inlet filter. Loosen tank attachment
screw (Fig. 1) and open unit. Remove filter cover and
strainer screen (Fig. 5). Rinse strainer screen clean in
warm water. Replace strainer and retighten filter cover.
Note: The SS-P 1200EX is equipped with two filters: a
solution inlet filter and a recovery tank outlet filter (Fig.
6). Both filters should be cleaned after each use.
AS NEEDED
Lubricate pressure regulator O-ring. Access O-ring by
unscrewing and removing pressure regulator (Fig. 2, G).
Lubricate with a suitable O-ring lubricant.
Lubricate the solution line quick-connect coupling
(Fig. 1) with a small amount of rust-inhibiting oil such as
LPS-3 or WD-40.
To maintain appearance, wipe interior and exterior
surfaces with a damp cloth. For deep cleaning and a
lasting, protective shine, use Dri-Eaz MicroGuard
Cleaner and MicroGuard Protectant, available from your
Sapphire distributor.
WARRANTY
Warranty information is available from your dealer or at
www.sapphirescientific.com.
Warranty registration
Visit www.SapphireScientific.com to register your
purchase. Registration allows us to better assist you with
using, maintaining or servicing your equipment, as well
as to contact you in case we have important safety
information concerning your Sapphire Scientific product.
If you determine service is required, have your
equipment model, serial number and original proof of
purchase available and call your distributor for
assistance with obtaining a return material authorization
(RMA).
24-00265 A 2010-06

SPECIFICATIONS

ALL MODELS
Vacuum
Double dual-stage. Installed in series.
motors
Solution tank 10 gal. | 37.9 l
Capacity
Recovery tank: 10 gal | 37.9 l
Rotomolded polyethylene housing and handle;
Construction
semi-pneumatic wheels.
Dimensions
39.5 × 32 × 19.75 in.
(H × L × W)
100.3 × 81.2 × 50.2 cm
Model
Features
SS-P 150
150 PSI
#78-001
SS-P 150H
150 PSI, 2000W
#78-002
heater
SS-P 500
500 PSI
#78-003
adjustable.
Pressure gauge.
SS-P 500H
500 PSI
#78-004
adjustable. 2000W
heater. Pressure
gauge.
S-SP1200EX
1200 PSI
#78-005
adjustable.
Pressure gauge.
Auto-fill. Auto-
dumpout.
CONTACT
Sapphire Scientific
2604 Liberator
Prescott, AZ 86301
800-932-3030
www.sapphirescientific.com
5
Dry weight
Power
75 lbs.
17 amp, 120V
34 kg
83 lbs.
17 amp (17 amp
38 kg
on cord 2 while
heating), 120V
90 lbs.
18 amp, 120V
41 kg
98 lbs.
18 amp (17 amp
45 kg
on cord 2 while
heating), 120V
124 lbs.
16 amp on cord
56 kg
1 (17 amp on
cord 2), 120V
Sapphire Scientific

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ss-p 500Ss-p 150hSs-p 500hSs-p 1200ex

Table of Contents