Product Introduction - Sapphire Audio SS-P 150 User Instructions

FIG. 1: Front View
Recovery tank
cover
Solution
line quick-
connect
Quiet operation: Noise suppressor for quiet operation.
May be operated with single motor for reduced noise.
Fast access to parts: Clamshell design hinges open for
easy filter maintenance.
Fast, steady heat: Powerful 2000 watt in-line heater on
select models ("H" designates heated models).
Convenient: Top-mounted switches are easy to reach
and feature protective caps.

PRODUCT INTRODUCTION

All SS-P series portable extractors are equipped with a
control panel conveniently located at the top of the unit.
The rocker-style switches are fitted with protective
rubber caps. Heated units (designated with an "H" in the
model name) are equipped with an additional switch to
control the heater.
Dual vacuum motors draw air and extracted moisture
through the vacuum hose into the recovery tank. Users
may select single motor mode ("VAC 1") for quieter
operation or both motors ("VAC 1&2") for maximum
vacuum.
24-00265 A 2010-06
Control Panel
Vacuum
inlet
Recovery tank
outlet valve handle
Tank attachment
screw. Unscrew to
open unit.
R k
FIG. 2: Rear View
C
F
H
A Cord and tool storage compartment
B Auto-fill coupling (1200EX only)
C Vacuum exhaust. Keep clear.
D Pressure gauge (500 and 1200EX models only)
E Auto Pumpout Switch
F Auto Pumpout coupling (1200EX only)
G Pressure regulator (500 and 1200EX models only)
H Dual power cords (heated models and 1200EX only)
Solution pumps deliver pressurized solution to the
cleaning tool. The model number indicates the
approximate maximum pressure in pounds per square
inch. Models designated 500 and 1200 are equipped
with an adjustable pressure regulator and a pressure
gauge.
Heated units include a 2000 watt inline solution heater.
Heated solution can boost the effectiveness of your
cleaning.
The SSP-1200EX includes Automatic Pumpout and
AutoFill features which automate the filling and emptying
procedures.
CONTROLS
ON THE CONTROL PANEL (see Fig. 3)
VAC 1 turns on one vacuum motor. This provides for
quieter operation and lower amp draw (about 8 amps).
VAC 1&2 turns on both vacuum motors. This provides
maximum vacuum power. Draws about 13.5 amps.
Solution pump. Turns solution pump on and off.
2
A
B
D E
G
Sapphire Scientific