Black Box IC665A Manual page 32

DOCKING STATION WITH VIDEO
In mirror mode, the video component will automatically select the settings (screen
resolution, color quality, and refresh rate) for the additional monitor. But you can
manually adjust the settings as required. The additional monitor's settings are
limited by those of the primary monitor. For example, even though your additional
monitor supports a resolution of up to 1680 x 1050, you can only configure it to
use 1280 x 1024 since the primary monitor only supports a resolution of up to 1280
x 1024.
If you change the video output to extended mode and then want to switch back to
mirror mode, follow these steps and refer to Figure 4-6 on the next page:
1. Position the mouse anywhere on your computer desktop, right-click and select
Personalize > Display Settings on Vista or Properties > Settings on XP/2000.
2. In the Display drop-down menu, select the option with the string "DisplayLink
Graphics Adapter."
3. Uncheck the Extend the desktop onto this monitor on Vista or Extend my
Windows desktop onto this monitor on XP/2000.
4. Click OK to close the settings screen.
Figure 4-6. Connections to extend the desktop onto this monitor screen.
Use the Additional Monitor as your Primary Monitor
To configure the additional monitor as the primary display:
1. Position the mouse anywhere on your computer desktop, right-click and
select Personalize > Display Settings on Vista or Properties > Settings on
XP/2000.
30