Connecting Devices To The Docking Station; Connecting An Ethernet Network Device; Connecting Advi Monitor - Black Box IC665A Manual

3.4 Connecting Devices to the Docking Station

Now the installation is complete. You can connect the peripherals/monitor to
appropriate ports on the docking station as required. You can also connect and
disconnect the peripherals/monitor any time without disconnecting the docking
station from the USB port on your computer.
3.4.1 C
ONNECTING AN
1. Connect an Ethernet cable to the Ethernet port on the docking station.
2. Connect the other end of the Ethernet cable to your network hub, switch,
router, or modem.
3.4.2 C
ONNECTING A
The equipped DVI-I (DVI-Integrated) connector transmits both the digital and
analog signals. This means it supports either of these two connection types (see
Figure 3-10):
• It can be connected to a DVI-D (digital) monitor using a DVI cable (not
included).
• Or, it can be connected to an analog VGA monitor using the provided DVI-I to
VGA adapter and a VGA cable (not included).
DVI cable
connecting a VGA monitor using the DVI to VGA adapter.
E
THERNET NETWORK DEVICE
DVI M
ONITOR
Connect to
DVI monitor
Figure 3-10. Connecting a DVI monitor or
CHAPTER 3: Installation
DVI to VGA
adapter
VGA cable
Connect to
VGA monitor
23