Miller Electric OM-229 038D Owner's Manual page 32

NOTE
Wire Diameter
Metric
0,6/0,8 mm 0,023/0,030 in
0,8/1 mm 0,030/0,035 in
1/1,2 mm 0,035/0,045 in
1/1,2 mm 0,035/0,045 in
1/1,2 mm 0,035/0,045 in
OM-229 038 Page 28
Table 7-1. Drive Roll And Wire Guide Kits (2 Roll Models)
Base selection of drive rolls upon the following recommended usages:
1. V-Grooved rolls for hard wire.
2. U-Grooved rolls for soft and soft shelled cored wires.
3. U-Cogged rolls for extremely soft shelled wires (usually hard surfacing types).
4. V-Knurled rolls for hard shelled cored wires.
5. Drive roll types may be mixed to suit particular requirements (example:
V-Knurled roll in combination with U-Grooved).
Fraction Decimal
0,023/0,030 in
0,030/0,035 in
0,035/0,045 in
0,035/0,045 in
0,035/0,045 in
Drive Roll
Part No. Type
156053100 V
156053101 V
156053102 V
156053104 U
156053106 V-K
Wire Guide
Inlet
156090018
156090018
156090018
156090018
156090018