Installation; Package Contents; Before You Connect To The Network - D-Link DGS-3700-12 Hardware Installation Manual

Dgs-3700 series
Hide thumbs Also See for DGS-3700-12:
Table of Contents

Advertisement

Installation

Package Contents

Before You Connect to the Network

Ventilation Requirements
Installing the Switch without the Rack
Installing the Switch in a Rack
Mounting the Switch in a Standard 19" Rack
Installing/Removing the Power, Fan or Dust Module
Power On (AC Power)
Power Failure (AC Power)
Connecting DC Power to the DGS-3700 Series
Package Contents
Open t he s hipping c arton of t he Switch an d c arefully unp ack i ts c ontents. T he c arton s hould c ontain t he following
items:
One DGS-3700-12/DGS-3700-12G stand-alone switch
One AC power cord
Registration card
Mounting kit (two brackets and screws)
Four rubber feet with adhesive backing
RS-232 console cable
If any item is found missing or damaged, please contact your local D-Link Reseller for replacement.
Before You Connect to the Network
The site where you install the Switch may greatly affect its performance. Please follow these guidelines for setting up
the Switch.
Install t he Switch on a s turdy, level surface that c an support at l east 6.6 lb (3 kg) of w eight. Do n ot place
heavy objects on the Switch.
The power outlet should be within 1.82 meters (6 feet) of the Switch.
Visually inspect the power cord and see that it is fully secured to the AC power port.
Make sure that there is proper heat dissipation from and adequate ventilation around the Switch. Leave at
least 10 cm (4 inches) of space at the front and rear of the Switch for ventilation.
Install the Switch in a fairly cool and dry place for the acceptable temperature and humidity operating ranges.
Install the Switch in a site free from strong electromagnetic field generators (such as motors), vibration, dust,
and direct exposure to sunlight.
When installing the Switch on a level surface, attach the rubber feet to the bottom of the device. The rubber
feet cushions help protect the casing from scratches and prevent it from scratching other surfaces.
DGS-3700 Series Layer 2 Gigabit Ethernet Switch Hardware Installation Guide
Section 2
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgs-3700-12g

Table of Contents