Cleaning and care
Cleaning the surfaces of the
fluff filter
Hair and fluff on garments are collected
by the fluff filters in the door and the
door opening.
Tip: You can use a vacuum cleaner to
remove the fluff.
Clean the surfaces of the fluff filters
in the door and the door opening
after each drying programme.
1. In the door.
^ Open the door and pull the fluff filter
(1) out of the door as illustrated.
34
^ Use your fingers or a vacuum cleaner
to remove the fluff from the surface of
the filter.
Extra cleaning
^ Remove any fluff from the hollow part
of the door with a bottle brush or a
vacuum cleaner.
^ Also clean the door seal (2) with a
damp cloth.
^ Push the filter back into the door
holder until it clicks into position.
Ensure it is facing the correct way.
2. In the door opening.
^ Use your fingers or a vacuum cleaner
to remove the fluff from the two fluff
filters in the door opening.
^ Close the door.