Fuel; Oil - Cessna 172S Nav III Information Manual

Hide thumbs Also See for 172S Nav III:
Table of Contents

Advertisement

~
SECTION 1
CESSNA
GENERAL
MODEL 172S NAV III
FUEL (Continued)
~~
NOTE
Isopropyl
alcohol
or diethylene
glycol
monomethyl
ether (DiEGME) may be added to the fuel supply.
Additive
concentrations
shall
not
exceed
1%
for
isopropyl alcohol or 0.10% to 0.15% for DiEGME.
Refer to Section 8 for additional information.
Fuel Capacity:
Total Capacity:
56.0 U.S. gallons.
Total Usable:
53.0 U.S. gallons.
Total Capacity Each Tank:
28.0 U.S. gallons.
Total Usable Each Tank:
26.5 U.S. gallons.
NOTE
To
ensure
maximum
fuel
capacity
and
minimize
cross-feeding
when
refueling,
always
park
the
airplane in a wings-level, normal ground attitude and
place the fuel selector in the Left or Right position.
Refer
to
Figure
1-1
for
normal
ground
attitude
dimensions.
OIL
Oil Specification:
MIL-L-6082 or SAE J1966 Aviation Grade Straight Mineral Oil: Used
when the airplane was delivered from the factory and should be
used to replenish the supply during the first 25 hours. This oil should
be
drained
and
the
filter
changed
after
the
first
25
hours
of
operation. Refill the engine with MIL-L-6082 or SAE J1966 Aviation
Grade Straight Mineral Oil and continue to use until a total of 50
hours has accumulated or oil consumption has stabilized.
MIL-L-22851 or SAE J1899 Aviation Grade Ashless Dispersant Oil:
Oil conforming to the latest revision and/or supplements to Textron
Lycoming Service Instruction No. 1014, must be used after first 50
hours or once oil consumption has stabilized.
(Continued Next Page)
1-6
U.S.
172SPHAUS-00

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents