Installation
Firmware for DriveDOCK Extreme
The BEAM DriveDOCK Extreme requires Eagle version 2.0 or
higher to support Push-To-Talk operation.
This can be downloaded from the BEAM website:
www.beamcommunications.com/support/drivedockextreme
This firmware is also backward compatible with the
standard Iridium Extreme® Handset.
Extended Iridium Extreme® Battery (Optional)
The Iridium Extreme® PTT device may be fitted with an
extended battery that protrudes above the rear surface of
the Iridium phone.
A device fitted with this high capacity battery cannot be
docked in the cradle until the Hi Capacity infill has been
removed.
1. To accommodate the larger
battery, a Battery Infill must
be removed from the Dock.
Removal
2.
Place a fingernail/
coin/screwdriver in
the slot and push
the infill towards the
centre of Dock.
12
Insertion
a) Locate the Battery Infill in the base of the Dock
b) Slide the Infill into the right side of the Docking area until it
'Clicks' into place
a
Mounting Bracket
(wireless & corded)
PTT Bracket
Spacer
Step 1 – Place the spacer in the circular cavity at the
rear of the DriveDOCK Extreme.
Step 2 – Optional: fit the Privacy Handset bracket if
desired.
b
"CLICK"
RAM pivot
PTT Bracket
Privacy Handset
Bracket
Spacer
DOCK