Superior WRE3836WS Installation And Operation Instructions Manual page 18

Wood-burning outdoor fireplace
Table of Contents

Advertisement

PUREFIRE EMISSION CONTROL SYSTEM
The smoke that is usually seen coming out
of a chimney is essentially a combination of
unburned fuel (carbon and hydrogen) and
moisture in the form of water vapor. The cata-
lyst is a technology that provides secondary
combustion for the wood burning process.
MAINTENANCE
The PureFire System is a maintenance free
technology. Do not attempt to remove or clean
the combustor. The direct flame from the fire
will clean the combustor. Only a certified
technician should remove the unit. To ensure
proper fireplace operation, the PureFire Sys-
tem should be replaced every 3 to 5 years
(see Parts on page 19).
NOTE: Chimney smoke may be visible during
the first 8 to 10 minutes of fireplace operation
when the fire is first getting started and the
final 8 to 10 minutes of operation while the fire
is dissipating. Under normal operating condi-
tions, you should see little or no smoke coming
out of the chimney. If continuous smoke is
visible, make sure only dry seasoned wood
is being burned. If visible smoke continues,
the combustor has ceased to function or
there is thermal crumbling. Call INNOVATIVE
HEARTH PRODUCTS at 1-800-655-2008 for
replacement parts.
18
Continued
www.SuperiorFireplaces.US.com
WARRANTY
INNOVATIVE HEARTH PRODUCTS war-
ranty obligations for the PureFire Emissions
Control System are limited to the terms set
forth below.
INNOVATIVE HEARTH PRODUCTS war-
rants to the consumer who purchases a
new solid fuel burning fireplace containing
a PureFire Emissions Control System as a
new component, to replace the catalyst at
no charge should it cease to function within
three years from the date of purchase. The
PureFire Catalytic Component is designed to
perform efficiently for three years of fireplace
operation. ONLY recommended fuels should
be burned. Follow the fueling directions in
manufacturers operation manual. For war-
ranty purposes, proof of fireplace purchases
is required. Labor for removal and/or instal-
lation of the catalytic component is not the
responsibility of the manufacturer.
Neither INNOVATIVE HEARTH PRODUCTS
nor the dealer who sells the PureFire Emis-
sions Control System is responsible for
indirect, incidental, special, punitive or conse-
quential damages arising out of the improper
use of this product or the continued use of
this product beyond the required replace-
ment period.
127023-01A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wre3836whWre3836rhWre3836rs

Table of Contents