Fender Musical Instruments Co. All specifications subject to change without notice. For warranty repair service, only Fender specified part numbers are to be used. It is recommended they also be used for post-warranty maintenance and repair.
Page 3
One, to set the output impedance of the amplifier to better achieve the cranked-up sound at a lower volume level. On the B channel, with a single Tone-master enclosure, this switch should be set according to the setting of the B channel VOLUME control. For volume setting of 3.5 and lower, “Lo”...
Need help?
Do you have a question about the TONE-MASTER and is the answer not in the manual?
Questions and answers