Removing Existing Barrel And Installing Contact Adapter - Miller Electric Spoolmate 3035 Owner's Manual

3-5. Removing Existing Barrel And Installing Contact Adapter

4
6
7
Tools Needed:
12 mm
OM-1216 Page 12
4
5
1
3
2
1 Base Nut Location
Remove base nut from handle.
2 Handle Section
Remove handle section from gun.
3 Drive Roll Assemblies
3
Remove drive roll assemblies.
4 Nut
Remove nut from barrel.
2
5 Barrel
Remove barrel
Disconnect gas hose from gas
nipple.
6 Antirotation Pin
7 Contact Adapter
Remove antirotation pin from
contact adapter.
Install contact adapter into gun, and
secure with nut.
Reinstall drive roll assemblies.
Reinstall handle section onto gun.
Reinstall base nut onto handle.
from gun.
802 379-B