Advertisement
Quick Links
OWNER'S MANUAL
All Terrain LX Running Gear For Gas And Diesel (300 457 And 300 458)
All Terrain LX Running Gear With Never Flatt Tires For Gas And Diesel (300 492 And 300 493)
DANGER! − Indicates a hazardous situation which, if not
avoided, will result in death or serious injury. The possible
hazards are shown in the adjoining symbols or explained
in the text.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible ha-
zards are shown in the adjoining symbols or explained in
the text.
NOTICE Indicates statements not related to personal injury.
Indicates special instructions.
FORM: OM-237 279C
Beware of electric shock from wiring. Stop engine and
disconnect negative (−) cable from battery before install-
ing this kit. Reinstall all panels and covers.
Falling equipment can cause serious personal injury and
equipment damage. Use lifting eye to lift unit and properly
installed accessories only, NOT gas cylinders. Do not
exceed maximum lifting eye weight rating. Lift and sup-
port only with proper equipment and correct procedures.
Wear safety glasses with side shields.
2008−04−21
©
2008 Miller Electric Mfg. Co.
Advertisement
Related Manuals for Miller Electric 300 457
Summary of Contents for Miller Electric 300 457
- Page 1 FORM: OM-237 279C 2008−04−21 All Terrain LX Running Gear For Gas And Diesel (300 457 And 300 458) All Terrain LX Running Gear With Never Flatt Tires For Gas And Diesel (300 492 And 300 493) DANGER! − Indicates a hazardous situation which, if not Beware of electric shock from wiring.
- Page 2 Assembling Of All Terrain Running Gear (300 457, 300 492) Tools Needed: 3/8, 9/16 in 7/16, 9/16 in Remove and dis- Model card existing Diesel ⇓ hardware before Model installing handle. ⇓ Remove paint from axle grooves before installing retaining rings.
-
Page 3: Description (Qty)
Assembly: Item Part Description (Qty) Assemble base rails, axles, and wheels (valve stems out). 220263 Assy, Handle Running Gear (1) 108940 Screw, 250−20x .75 Hexwhd.61d Gr5 Pld (2) Install onto generator using rail mounting hole 5 for gas models or 1 for 220375 Bracket, Crossmember (1) diesel models. - Page 4 Assembly Of All Terrain Running Gear With Protective Cage (300 458, 300 493) Tools Needed: 3/8, 9/16 in 7/16, 9/16 in Remove and discard exist- ing hardware before instal- ling handle. ⇓ Remove paint from axle grooves before installing retaining rings. Ref.
- Page 5 Assembly: Item Part Description (Qty) Assemble base rails, axles, and wheels (valve stems out). 220260 Rail, Side (2) Install onto welding generator. Use 108940 Screw, 250−20 x .75 Hexwhd .61d Gr5 Pld (8) mounting hole 5 in rails. Adjust to 220266 Assy, Cable Holder (4) achieve proper balance for applica-...