Download Print this page

Miller Electric Gas Cylinder Rack Owner's Manual

For renegade 180

Advertisement

Quick Links

OWNER'S MANUAL
Gas Cylinder Rack/Mixed Gas Regulator 300237 for Renegadet 180
NOTICE − Lift Eye Kit 195353 CAN NOT be installed when this kit is installed.
1.
Safety Symbol Definitions
DANGER! − Indicates a hazardous situation which, if not
avoided, will result in death or serious injury. The possible
hazards are shown in the adjoining symbols or explained
in the text.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible ha-
zards are shown in the adjoining symbols or explained in
the text.
NOTICE Indicates statements not related to personal injury.
Indicates special instructions.
Wear safety glasses with side shields.
Beware of electric shock from wiring. Stop engine and
disconnect negative (−) cable from battery before install-
ing this kit. Reinstall all panels and covers.
2.

Parts List

Item
Part
No.
No.
300237
1
. . . . . . . .
229713
. .
2
. . . . . . . .
229714
. .
3
. . . . . . . .
229715
. .
4
. . . . . . . .
230765
. .
5
. . . . . . . .
601941
. .
6
. . . . . . . .
152461
. .
7
. . . . . . . .
602154
. .
8
. . . . . . . .
221037
. .
9
. . . . . . . .
229566
. .
10
. . . . . . .
223861
. .
11
. . . . . . .
230796
. .
12
. . . . . . .
230797
. .
13
. . . . . . .
113786
. .
BE SURE TO PROVIDE MODEL AND SERIAL NUMBER WHEN ORDERING REPLACEMENT PARTS.
Description
Gas Cylinder Rack/Regulator
Bracket, Mtg Gas Bottle Lower
Bracket, Mtg Gas Bottle Side
Bracket, Mtg Gas Bottle Upper
Strap, Retaining Cylinder Gas
Screw, 250−20x1.75 Hexwhd.61d Gr5 Pld
Nut, 250−20 .44hex .23h Stl Pld Sem Cone Wshr.65d
Screw, 250−20x .50 Hexwhd.50d Stl Pld Slffmg Tap−rw
Regulator/Flowmeter, 10−50 Cfh Argon/CO2
Hose, Gas 7 Ft
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clip, Edge W/Cable Tie
Label, Warning Oversized Cyl/Falling Eq
Label, Warning Oversized Cyl/Falling Eq (Sp)
Welding Wire, Stl Hard .030 4" Spool 2lbs ER70S−6
FORM: OM-230806A
Use above FORM number when ordering extra manuals.
Build-up of gas can injure or kill. Shut off shielding gas
supply when not in use. Always ventilate confined spaces
or use approved air-supplied respirator.
Falling equipment can cause serious personal injury and
equipment damage. Do not lift unit with cylinder
installed on rack. Lift and support only with proper
equipment and correct procedures.
Tipping equipment can cause injury and damage
equipment. Do not move cart where two wheels are at
different heights and cart could tip − avoid tipping. Be
careful when moving unit over uneven surfaces. Do not
use an oversized cylinder or exceed maximum cylinder
weight.
Cylinders contain gas under high pressure and can ex-
plode if damaged. Never let a welding electrode touch
any cylinder. Always secure cylinder to running gear, wall,
or other stationary support.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
2007−11
Quantity
1
1
1
1
5
5
4
1
1
4
1
1
1

Advertisement

loading

Summary of Contents for Miller Electric Gas Cylinder Rack

  • Page 1: Parts List

    FORM: OM-230806A 2007−11 Use above FORM number when ordering extra manuals. Gas Cylinder Rack/Mixed Gas Regulator 300237 for Renegadet 180 NOTICE − Lift Eye Kit 195353 CAN NOT be installed when this kit is installed. Safety Symbol Definitions DANGER! − Indicates a hazardous situation which, if not Build-up of gas can injure or kill.
  • Page 2 Installing Cylinder Rack And Gas Hose Tools Needed: Maximum Cylinder Weight = 80 lb (36.3 kg) Maximum Cylinder Diameter = 7 in. (178 mm) Maximum Cylinder Height = 48 in. (1220 mm) Stop engine and let cool or discon- 1/4−20 Nut Side Gas Bottle Mounting Bracket nect utility input power.
  • Page 3 Tools Needed: Stop engine and let cool or discon- Edge Clip nect utility power. Remove strap from clip, turn 90 degrees Route gas hose from rear of unit to front. Gas Hose and insert into clip as shown. Push clips Connect gas hose to front panel.
  • Page 4: Installing Gas Supply

    Installing Gas Supply Tipping equipment cause injury and damage. Do not exceed maximum cylin- der weight, diameter, and/or height for this cylinder rack. Strap DO NOT use Argon/Mixed gas reg- ulator/flowmeter with CO shielding Obtain gas cylinder and use strap gas.

This manual is also suitable for:

Mixed gas regulator 300237