Setting; Set Indoor Station Address (X200, X100); Set Function Of Light Button - ABB 83210-AP-xxx-500 User Manual

ABB-Welcome
Pos : 26 /DinA4 - Anl eitungen Onli ne/Ueberschriften/2./Bedi enaktionen @ 20\mod_1323262294281_15.doc x @ 111911 @ 2 @ 1
4.2

Setting

Pos : 27 /DinA4 - Anl eitungen Onli ne/Ueberschriften/3./Sprec h- und Videover bindung @ 20\mod_1323262368700_15.doc x @ 111927 @ 3 @ 1
4.2.1

Set Indoor station address (X200, X100)

Pos : 28 /DinA4 - Anl eitungen Onli ne/Inhalt/KN X/D oor Entr y/83220-AP- xxx/Sprec h- und Videover bindung - 83220- AP- xxx @ 20\mod_1323262341852_15.doc x @ 111919 @ @ 1
Step1: hold "light" button
Step2: hold "talk" button
Step3: press "mute" button
The value is indicated by LED of each button.(Default value =0)
Led "talk" flashes, 0xx;
Led "unlock" flashes, 1xx;
Led "light" flashes, 2xx;
Step4: hold "light" button
4.2.2

Set function of light button

Step1: hold "light" button
Step2: hold "unlock" button
Step3: press "mute" button
The value is indicated by LED of each button.(Default value =0)
Led "Talk" flashes, switching the lighting;
Led "Unlock" flashes, opening the 2nd lock
Led "Light" flashes, room to room intercom
Led "Mute" flashes, call Guard unit
Step4: hold "light" button
|
for 3s to enter setting mode (4 LEDs are on)
for 3s to enter the setting of X200/X100.
to change the number.
24
for 3s to enter setting mode (4 LEDs are off)
for 3s to enter setting mode (4 LEDs are on)
for 3s to enter the setting of light button.
to change the function.
for 3s to enter setting mode (4 LEDs are off)
024
124
224
— 7 —