ABB 83210-AP-xxx-500 Welcome user manual page 14
Audio hands-free indoor station
Table of Contents
ABB-Welcome
Installation dimensions for slotted screw holes
1.
The bottom of the device has screw holes for fastening on the wall according to
the above dimension instructions.
2.
In addition, the bottom of the device can be fixed to the existing flush -mounted
box. The dimension of the compatible flush-mounted box is shown above.
Wiring
Fix the bottom of the device and connect it with reference to the graphics. The insulated
section of the cable end must not be longer than 10mm.
Settings
Set addresses of the preferred outdoor stations and the address of the indoor station on
the jumper (see chapter "
|
Adjusting the device
").
— 14 —
Table of Contents
Need help?
Do you have a question about the 83210-AP-xxx-500 and is the answer not in the manual?