Door Open - PEUGEOT 5008 Handbook

Rigid panel
Each 2
nd row seat backrest has a rigid panel
attached.
This panel enables you:
- to have a continuous load surface in the
boot, whatever the positions of the seats,
- to avoid having objects sliding under the
2 row seats. 30 kg maximum on each
nd
panel.
Releasing / Locking the rigid panel
F Before deploying the rigid panels, check
that the 2
nd
row seats are positioned as far
towards the rear as possible.
F Slide the latch E on the panel upwards, to
release it.
F Return the panel to its initial position, then
slide the latch E downwards, to lock it in
place.
Entering / Exiting the 3
(7 seat version)
F Raise the aircraft style table on the 2
seat if it is down.
F Hold the control F in the raised position,
the seat unlocks and the seat base comes
up against the backrest.
F Push the seat backrest forwards, holding
the control F forwards.
rd
row Repositioning the seat,
from the outside, with the

door open

If there are passengers seated in the 3
(7 seat version):
F Manually return the assembly as far as
possible rearwards; the seat does not
return as far as the maximum rearwards
position so as to retain leg space for the
3
rd row passengers.
F Fold the seat base.
nd
row
Comfort
3
rd row
79