Vehicle Configuration - PEUGEOT 5008 Handbook

Monitoring

Vehicle configuration

Once the "Vehicle configuration" menu has
been selected, you can activate or deactivate
the following equipment (according to country):
- wiper linked with reverse gear (refer to the
"Visibility" section),
- selective unlocking (refer to the "Access"
section),
- "guide-me-home" lighting (refer to the
"Visibility" section),
- directional headlamps (refer to the
"Visibility" section),
- automatic parking brake** (refer to the
"Driving" section),
- parking space sensors (se the "Driving"
section),
- ...
Options
Once the "Options" menu has been selected,
you can start diagnostics of the status of the
equipment (active, not active, faulty).
34
Date and time
Once the "Display settings" menu has been selected,
you can gain access to the following settings:
- year,
- month,
- day,
- hour,
- minutes,
- 12 or 24 hour mode.
F Once you have selected a setting, press
the "OK" button to change its value.
F Wait for approximately ten seconds without
any action to allow the changed data to
be recorded or press the "ESC" button to
cancel.
The screen then returns to the normal display.
Languages
Once the "Languages" menu has been
selected, you can change the language used
by the display (Français, Italiano, Nederlands,
Portugues, Portugues-Brasil, Türkçe, Deutsch,
English, Espanol).
Units
Once the "Units" menu has been selected, you
can change the units for:
- temperature (°C or °F),
- fuel consumption (l/100 km, mpg or km/l).
For safety reasons, configuration of the
multifunction screen by the driver must
only be done when stationary.
** Depending on country of sale.