Lighting Dimmer; Trip Distance Recorder - PEUGEOT 5008 Handbook

Hide thumbs Also See for 5008:
Table of Contents

Advertisement

Monitoring
Distance recorders
The total and trip distances are displayed for
thirty seconds when the ignition is switched off,
when the driver's door is opened and when the
vehicle is locked or unlocked.
When traveling abroad, you may
have to change the units of distance:
the display of road speed must be in
the official units (miles or km) for the
country. The change of units is done via
the screen configuration menu, with the
vehicle stationary.
Total distance recorder
It measures the total distance travelled by the
vehicle since its first registration.
32

Trip distance recorder

It measures a distance travelled since it was
reset to zero by the driver.
F With the ignition on, press the button until
zeros appear.

Lighting dimmer

System for manual adjustment of the
brightness of the instrument panel in relation to
the exterior brightness.
Activation
When the vehicle lighting is on:
F press the button to change the brightness
of the instrument panel,
F when the lighting reaches the minimum
setting, release the button, then press
again to increase it,
or
F when the lighting reaches the maximum
setting, release the button, then press
again to reduce it,
F when the lighting reaches the level of
brightness required, release the button.
When the vehicle lighting is on, you
cannot switch the instrument panel
lighting off but you can adjust it to
minimum.
Deactivation
When the lighting is off, or in day mode on
vehicles fitted with daytime running lamps,
pressing the button does not have any effect.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents