Table of Contents
Advertisement
Lens Delay Control
The lens delay control is used to slow the lens-switching time to the clear state after
welding.
The
delay
is
particularly
useful
in
eliminating
bright
after-rays present in higher amperage applications where the molten puddle re-
mains bright momentarily after welding. Adjusts from 0.10 second (Min) to 1.0 sec-
ond (Max).
Low Battery Indicator
The low battery indicator lights when 2−3 days of battery life remain.
Replace the battery with a readily available coin type CR2450 Lithium Battery or
equivalent. (Miller Part No. 217043) (see Section 4).
NOTES
Page 6
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Elitet and is the answer not in the manual?