Installing Integrated Management Display - Compaq ProLiant 3000 Setup And Installation Manual

Installing Integrated Management Display

1. Prepare the server for installation. See section "Preparing the Server,"
outlined earlier in this chapter.
2. Remove IMD blank.
Figure 4-18. Removing IMD blank
3. Install IMD.
Figure 4-19. Installing IMD
For use with 350-MHz or greater Intel processor-based servers only
Writer: Cheri Stewart Project: Compaq ProLiant 3000 Servers Setup and Installation Guide Comments: 179776-002
ACT
COMP
COMP ACT
2
File Name: E-CH04.DOC Last Saved On: 1/12/99 1:28 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
2
2
1
2
Compaq ProLiant 3000 Servers Setup and Installation Guide
4-21