Your Scooter - Pride Mobility legend xl Owner's Manual

TILLER CONSOLE
The tiller console houses all of the controls needed to drive your scooter, including the speed adjustment dial, half/full
speed switch, throttle control lever, battery condition meter, lights switch, hazard lights switch, turn signal buttons,
status LED, and horn buttons. See figure 5.
WARNING! Do not expose the tiller console to moisture. In the event that the tiller console
does become exposed to moisture, do not attempt to operate your scooter until the tiller
console has dried thoroughly.
KEY SWITCH
STATUS LED
LIGHTS SWITCH
HORN BUTTON
HALF/FULL SPEED SWITCH
TURN SIGNAL BUTTON
Figure 5.Tiller Console
Battery Condition Meter
When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the approximate
battery voltage strength. For further information on battery charging, see VI. “Batteries and Charging.”
Turn Signal Buttons
n Press the appropriate turn signal button once to activate it.
n Your scooter’s turn signals are timed to shut off automatically.
Hazard Lights Switch
This switch activates the 4-way flashers on your scooter.
n Toggle the switch forward to turn on the flashers.
n Toggle the switch rearward to turn off the flashers.
Horn Button
Your scooter must be turned on for the horn to be operational.
n This button activates a warning horn.
n Do not hesitate to use the warning horn when doing so may prevent accident or injury.
Key Switch
n Insert the key into the key switch and turn it clockwise to power up (turn on) your scooter.
n Turn the key counterclockwise to power down (turn off) your scooter.
WARNING! If the key is moved to the “off” position while your scooter is in motion, the
electronic brakes engage and your scooter will come to an abrupt stop!
20
V . Y O U R S C O O T E R
THROTTLE CONTROL LEVER
www.pridemobility.com
POWER SEAT SWITCH (OPTIONAL)
400/181
BATTERY CONDITION METER
SPEED ADJUSTMENT DIAL
HAZARD LIGHTS SWITCH
HORN BUTTON
TURN SIGNAL BUTTON
Legend XL