In this manual you will find the essentials you need to know when repairing the wet and dry vacuum cleaners in the MAXXI II series. When carrying out repairs, make sure you have a suitable workbench or the like with the necessary water and power supply available.
Safety Issues To be performed by a skilled or instructed person only ! Disconnect the vacuum cleaner from the power supply before starting the work! Safety instructions marked with this symbol in this manual must be observed to prevent danger to persons. This symbol is used to mark safety instructions that must be observed to prevent damage to the equipment and degradation of...
Construction MAXXI II - Top 35 Art: 6.1 Art: 6.1 shows how the handle, top cover and the switch is placed on top of the motor cover. Art: 6.3 Art: 6.3 shows how the motor is fitted into the bottom part of the motor head.
Page 11
Construction MAXXI II - Top 55-1, 75-1 Art: 7.1 Art: 7.1 shows how the top cover and the switch is placed on top of the motor cover. Art: 7.3 Art: 7.3 shows how the motor is fitted into the bottom part of the motor head.
Page 12
Construction MAXXI II - Top 55-2, 75-2 Art: 8.1 Art: 8.1 shows how the top cover and the switches are placed on top of the motor cover. Art: 8.3 Art: 8.3 shows how the motors are fitted into the bottom part of the motor head.
Construction MAXXI II - Container 35 Art: 9.1 Art: 9.1 shows how the 35 L container is fitted with front and back wheels including the rear axel. *Please note that the inlet will need to be damaged/cut in order to change it.
Page 14
Construction MAXXI II - Container 55-1, 55-2, 75-1, 75-2 Art: 10.1 Art: 10.1 shows how the drain hose, drain lit, and the release is fitted to the container. Art: 10.2 *Please note that the Inlet will need Art: 10.2 shows how the front- and...
Need help?
Do you have a question about the maxxi II and is the answer not in the manual?
Questions and answers