Back-Panel Connectors (per SBB)
LED Indicators
Front panel
Drive drawer
Disk Drive In Carrier (DDIC)
6 Gb SAS IO module
Cooling module
Power Supply Unit (PSU)
10
•
3 m
•
5 m
MD1280 to MD1280:
•
0.6 m
•
2 m
•
4 m
•
6 m
NOTE: SAS connectors are SFF-8086/
SFF-8088-compliant.
•
One two-digit LCD indicator for Unit ID, error
code, and unit location identifier
•
One two-color LED indicator for power status
•
One single-color LED indicator for module fault
status (enclosure as a whole)
•
One single-color LED indicator for logical fault
status (drive, HBA, RAID controller, and so on)
•
One single-color LED indicator for drive drawer
1 fault status
•
One single-color LED indicator for drive drawer
2 fault status
•
One single-color LED indicator for sideplane
card and power status
•
One single-color LED indicator for drive drawer
fault status
•
One single-color LED indicator for logical fault
status
•
One single-color LED indicator for cable fault
status
•
Six single-color LED indicators for data transfer
status
One single-color LED for hard drive fault status
14 one-color LED status indicators, four each for
the three SAS ports, and two for the module status
•
One single-color LED indicator for module
status
•
One single-color LED indicator for battery fault
status (not currently used)
•
One single-color LED indicator for fan fault
status
•
One single-color LED indicator for PSU fault
status