Table of Contents
Advertisement
RPR 750IS Series
Pager Care
Protect your pager from liquids, extreme temperatures and
strong magnetic fields. Do not leave your pager exposed to
strong sunlight e.g. on a car dashboard, or a window sill. To
clean your pager, use a clean cloth dampened with a little
soapy water. Do not use solvents of any kind!
Wearing Your Pager
Your pager is supplied with a detachable 'Griptite' clip, which
is specifically designed to enable a tight grip-fit when used for
'in-pocket', or 'belt' applications. The tightness of the clip may
be adjusted, by varying the clip slider on the underside of the
clip assembly.
An elasticised detachable Lanyard option with a metal
retaining clip, is also supplied. This may be used in
conjunction with the 'Griptite' clip, or as a separate method of
attachment.
2. CONTROLS AND DISPLAY
ON/CANCEL/RECALL
BUTTON (OCR)
3. SWITCHING ON
To switch on your pager, press the ON/Cancel/Recall (OCR)
button once. The pager will emit a short beep and enter a self-
test routine, which will activate the LED, message display and
vibrate motor. The pager will then display its address and any
optional switch-on message that has been programmed. At
the end of this sequence, the display will blank and the pager
9
ALPHA-NUMERIC MESSAGE DISPLAY
MUTE BUTTON
9261-7912 Issue 8
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RPR 750IS SERIES and is the answer not in the manual?
Questions and answers