User System Settings Table - Aprilaire 8620W Owner's Manual

SETUP MENU

USER SySTEM SETTINGS TABlE

The following table is the list of the settings and their details. Default settings are shown in bold .
User system
setting Description
Temperature Set the thermostat to Fahrenheit or Celsius mode .
Scale
Lockout Type Sets the screen lockout level . Setting the Lockout Type to Full
will prevent any changes from being made at the thermostat.
setting the Lockout Type to Partial allows individual functions
to be locked out at the thermostat. set this to none to disable
the lockout feature . Note: The thermostat can be unlocked by
holding the [MENU] button for 7 seconds.
Mode Lockout Prevents changes to the system mode from being made at the
thermostat . Note: only available when the Lockout Type is set
to Partial.
Fan Lockout Prevents changes to the fan mode from being made at the
thermostat . Note: only available when the Lockout Type is set
to Partial.
Dehum Lockout Prevents changes to the dehumidification setpoint from being
made at the thermostat . Note: only available when the Lockout
Type is set to Partial.
34
SETUP MENU
USER SySTEM SETTINGS TABlE
User system
setting
Factory default setting
(bold) and setting range
Setpoint Lockout
Fahrenheit
Celsius
None
Partial
Max Setpoint
Full
Change in Lockout
Menu Lockout
Disable
Enable
Program Format
Disable
Enable
Reset Service
Reminders
Disable
Enable
(CONTINUED)
Description
Prevents or limits changes to the heating and cooling setpoints
at the thermostat . If set to Full no changes to the setpoints are
allowed. If set to Range, changes to the setpoint are limited by
the Max Temp Setpoint Change in Lockout . Note: only available
when Setpoint Lockout is set to Range .
Sets the maximum change to the heat or cool setpoint that can
be made at the thermostat. Note: only available when setpoint
Lockout is set to Partial.
Prevent the Menu screen from being accessed at the thermostat.
Note: only available if no other lockouts are enabled. If another
lockout is enabled the Menu screen is automatically locked out.
Enables the 7 day program.
Clears the Change Air Filter, HVAC, and Dehumidifier Service
reminders if they are active and resets the start date to the
current date. clears the change Water Panel reminder if it is
active. If the reminder is set to timed, the timer will be reset.
Factory default setting
(bold) and setting range
Disable
Full
Range
3°F or 1.5°C
1°F to 20°F (0 .5° to 10°C)
Disable
Enable
7-Day
non-Prog
No
yes
35