An error message is displayed at the end of a program.
Issue
The "FAULT" indicator
"Drain" lights.
The "FAULT" indicator
"Intake" lights.
The "FAULT" indicator
"Oversudsing" lights.
Frequently asked questions
Possible cause
The drain is blocked. Clean the drain filter and the
The water intake is
blocked.
The machine has
oversudsed.
Fix
– To turn off the fault message:
Open the drum door or press
and hold the "Pause/Hold to
Cancel" button until the fault
message goes out.
drain pump.
Possible fault:
Check if the water supply is
open all the way.
Use less detergent in the next
wash program, and follow the
recommended amount on the
detergent packaging.
29