Miele Novotronic W 1986 Operating Instructions Manual page 19

^ Turn off the washer with the "On/Off"
button.
^ Turn the program selector to "End".
^ Turn on the washer with the "On/Off"
button.
^ Turn the program selector to
"Drain/Spin".
^ Select the desired spin speed.
^ Press "Start".
The following changes can be made to
a program once it has already started:
– the spin speed may always be
adjusted.
– the wash options "Sensitive" and
"Extended" can be selected or
deselected up to 6 minutes after the
start of a program , and the
temperature of the program can be
changed to another temperature
within the same program.
Once the program starts, you cannot
change to a different program.
The "Anti-crease/End" indicator will
blink if the program selector has been
moved. The program will not be
affected. The indicator will go out if the
program selector is turned back to the
original program.
^ Turn the program selector to "End".
When the desired program cycle
flashes in the program sequence
display:
^ Turn the program selector back to the
original program within 4 seconds .
^ Turn off the washer using the "On/Off"
button.
^ Turn the program selector to "End".
^ Turn on the washer using the "On/Off"
button.
^ Select the new program.
^ Select the desired spin speed.
^ Press the "START" button.
19