Miele Novotronic W 1986 Operating Instructions Manual page 31

To turn off the fault indicator light: Turn off the washer with the "On/Off" button
and turn the program selector to "End".
The drain is blocked.
The water intake is
impaired.
The inlet hose filter is
dirty.
The machine has
oversudsed.
There is a fault.
The program selector
was moved to a
different setting after
the program started.
Clean the lint trap and the
drain pump.
Check to determine:
– if the water valve is open.
– if the inlet hose is kinked.
Clean the filter under
running water and carefully
remove any large particles.
Run a drain cycle.
Only use the recommended
amount of a high-efficiency
detergent.
Restart the program. If the
fault message appears
again, call Miele's Technical
Service Department.
Turn the program selector to
the original position.
27