Miele W1203 Operating Instructions Manual page 33

The machine has
oversudsed.
There is a fault.
The washer's four feet
are not resting evenly
on the floor.
There is no fault. Lapping sounds at the beginning
and end of the pump process are normal.
The water pressure is
too low.
The siphon tube is
incorrectly positioned
or clogged.
§
Use less detergent in the
next wash program.
Restart the program.
If the fault message appears
again, call Miele's Technical
Service Department.
Level the machine (see
Installation Instructions.)
– Clean the water intake
hose filter under running
water and carefully
remove any large
particles.
– Select the "Sensitive"
button.
Clean the siphon tube (see
"Cleaning and care-
"Cleaning the detergent
dispenser drawer").
29