Installation Beneath A Counter; Washer/Dryer Stack; Washer Stand With Drawer; Reinstallation Of The Machine Lid - Miele W1203 Operating Instructions Manual

If a countertop is placed over the
washer, at least a
left between the top of the machine
and bottom of the countertop;
nothing should be within
other side of the washing machine.
– When the machine lid needs to be
removed to reduce the height of the
machine, a
necessary. The cover plate in the
countertop kit replaces the machine
lid and ensures electrical safety.
– A filler frame* is recommenced at a
countertop height of 35
13
35 / " (90-91 cm)
16
– Water intake, drain and electrical
connections should be installed near
the machine and be easily
accessible.
An installation manual is supplied with
the countertop kit.
(* available from your Miele dealer or
Miele's Technical Service Department).
A washer stand is available to raise the
machine for convenience. It has a
drawer to store cleaning essentials.
The stand can be purchased as an
optional accessory.
44
1
/ " gap must be
4
1
/ " of any
2
* is
7
/ " to
16
The Miele washing machine can be
installed as part of a washer-dryer
stack in combination with a Miele
tumble dryer. An appropriate "stacking
kit" is required (part # 12 996 026).
(* available from your Miele dealer or
Miele's Technical Service Department.)
Safety distance to the wall:
13
minimum / " (2 cm)
16
Height:
Stacking kit with pull out shelf
15
66 / " (170 cm)
16
When reinstalling the machine lid,
check the fit of the cover at the rear
bracket to ensure safe transport.