Nokia 6600 Service Manual page 16

nokia
C P
ONNECTING EOPLE
Nokia Mobile Phones Customer Care EMEA
Technical Services, Repair Concepts
Remove LCD after protecting it with a film.
A slotted screwdriver can be used to release the three
snaps of the Shielding Gasket.
Use a Torx screwdriver to pull down the Earpiece.
The SRT-9 has to be placed onto the VGA Camera to
release its snaps. Some additional force might be
needed to press down the SRT-9. Then squeeze it as
shown in the picture.
Service Manual 6600 Level 1&2
PAGE 16 (27)
Confidential
SRT-6 can be used to remove the Grounding Clip.
Please note the guiding pin of the Earpiece while
assembling.
To prevent damages of spring contacts use always the
disassembly jig when removing VGA Camera.
Now, the VGA Camera can be removed by pulling up
the removal tool. Please note the right position of the
guiding snaps for re-assembling.
Copyright 2003 © Nokia Corporation
Approval 2.0
DJk
30.10.2003