Nokia 6600 Service Manual page 15

nokia
C P
ONNECTING EOPLE
Nokia Mobile Phones Customer Care EMEA
Technical Services, Repair Concepts
Use the SRT-6 as a lever to release the snap. Do not
twist SRT-6, because this would damage the cover.
Remove the modules from B-Cover.
Now, the Engine Module can be removed.
Release the next snap by using the SRT-6.
Service Manual 6600 Level 1&2
PAGE 15 (27)
Confidential
Now release the next snap. Use the same procedure on
the other side.
Place the SRT-6 between Engine Module and the UI
Support Frame. To open the connector, twist it
carefully as shown in the picture.
A slotted screwdriver can be used to open the clip of
the LCD Top Shield.
Now, take away the LCD Top Shield.
Copyright 2003 © Nokia Corporation
Approval 2.0
DJk
30.10.2003