Advertisement
How to connect 3.5"HDD
1. Prepare HDD at MASTER mode.
Set an HDD in MASTER mode. Please refer to an instruction manual of an HDD for
setting.
[ex.] HDD by HITACHI
Note) This is an example. When you set please refer to instruction manual of
your HDD.
*If you are using HDD of Western Digital which has "Single mode", please set it
in an SINGLE mode not MASTER.
2. Connect cables (for 3.5"HDD) to HDD
Connect the power supply cable and the flat cables to HDD. Please be careful that
you are connecting the cables in correct direction.
As pushing the cables forcibly may cause trouble of the machine, please handle
them carefully.
3. Connect the power supply cable and the flat cables into the main body of
KD25/35PRO
[Caution (attention!)]
Please be careful not to cut your hand with the edge of an HDD.
7
Advertisement
