Advertisement
[MIRROR MODE]
・ Writes in data to both HDDs once at the same time.
As it writes in the same data, it can be used for saving important data which
should not be lost for some reason such as trouble.
IMPORTANT: Before using 'mirror mode', please make two HDDs the same state with
'copy mode' or format them first. If you use 'mirror mode' without
doing it as mentioned above, data will not be backed up correctly.
＊ ＊ ＊ ＊ Capacity which will be recognized with 'mirror mode' is only up to the same part
of capacity of both hard disks.
Ex.) If you connect an HDD with capacity of 160GB to HD1 and another HDD with
120GB to HD2, and set it in 'mirror mode', only 120GB will be recognize each
and the rest part in the HD1 will not be used.
＊ If you set it in 'mirror mode' writing in plural data at the same time, you should
format them first and make sure the contents of the two HDDs are the same.
Otherwise data will not be written in correctly.
17
Advertisement
