Advertisement
changing mode
KD25/35PRO judges weather it is connected to a PC or not automatically, and in each
state the selectable modes are different; depends on if it is connected to PC or
operating by itself.
Mode choice will be displayed after having turned on a power supply.
Turn the mode switch to choose a mode you need.
The modes which can be chosen when not connected to PC
DISK COPY
PARTITION COPY
DISK COMPARE
PARTITION COMPARE
VERIFY CHECK
DISK CHECK
SEEK TEST
DATA ERASE 00×1
DATA ERASE NSA
OPTIONS
TO DEVICE MODE
POWER OFF
The modes which can be chosen when connected to PC
STANDARD
MIRROR
COMBINE
During 'Select:' is shown on the display, it is possible to change modes by pulling
out and connecting the cable.
* It is necessary that the cable is connected to PC and to be switched on because the
judgment for the modes is depends on if there is electricity from a cable.
13
Advertisement
